TABLE OF CONTENTS Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FCC Declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 EIA Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PRECAUTIONS COPYRIGHT: • Distributing copies of MP3, WMA, WMA with DRM tracks and/or WMV files without permission is a violation of international copyright laws. SAFETY: • Vibration experienced during walking or exercising will not affect the player. However, dropping the player or dropping a heavy object on the player may result in damage or sound distortion. • Avoid spilling any liquid onto or into the player.
FCC DECLARATION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Dear Customer: Selecting fine audio and video equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Decibel Level 30 40 50 60 70 80 Example Quiet library, soft whispers Living room, refrigerator, bedroom away from traffic Light traffic, normal conversation, quiet office Air conditioner at 20 feet, sewing machine Vacuum cleaner, hair dryer, noisy restaurant Average city traffic, garbage disposals, alarm clock at two feet THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE: 90 100 120 140 180 Subway, motorcycle, truck traffic, lawn mower Garbage truck, chain saw, pneumatic drill Rock band conce
LOCATION OF CONTROLS 1 9 2 3 4 5 10 11 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. 9. 12 USB Jack (Top of Unit) WHITE PART NO. EPEAREDFD001400-0-00*) (USB CABLE PART NO. CTPCLUSB07088D0-0-00*) 10. HOLD Switch (Side of Unit) 11. Volume + Button 12. Navigation ®/Skip/Search n Button Belt Clip (Rear of Unit) Reset Hole (Side of Unit) Volume - Button MENU Button Display Power/Play/Pause ®p Button Navigation √/Skip/Search o Button Headphones Jack (Top of Unit) (HEADPHONES BLACK PART NO.
CHARGING THE BATTERY This unit has a built-in Li-Polymer rechargeable battery. When the bars in the battery indicator (in the display) become low (see Figure 1), recharge the battery as follows. 1. Connect the USB cable to the USB jack on the top of this unit (as shown) and to the USB port on your computer; “✓ OK to Remove” will appear on the screen. When charging, the battery indicator will cycle from empty to full. Once the battery is fully charged, the battery indicator will stop cycling.
INSTALLING THE SOFTWARE Software Installation CD (PART NO. CTPCDMEMO081001-0-00*) General Information This unit is compatible with Microsoft Windows XP (Home or Professional Edition with Service Pack 2 or higher) or Vista. Use the CD to install Windows Media Player (10 or 11). IMPORTANT NOTE: • For Mac OS X: This unit is also compatible with Mac OS X; however, Windows Media Player 10 and 11 can not be used with Mac OS X.
WINDOWS MEDIA PLAYER 10 INSTALLATION Windows Media Player 10 is for use with Windows XP only. See page 12 for how to install Windows Media Player 11. (Windows Vista users must use Windows Media Player 11.) Once you have installed Windows Media Player 10, you can transfer MP3 files, WMA files and WMA files with DRM 9 or 10 to your player using the “Sync” function. 1. Insert the installation CD-Rom into the CD Drive, then the installation screen will appear.
WINDOWS MEDIA PLAYER 10 INSTALLATION 4. Installation will continue. 5. At the Welcome screen, click NEXT. 6. Select the desired privacy options.
WINDOWS MEDIA PLAYER 10 INSTALLATION 7. Click on Privacy Statement to view the Statement, if desired. When finished, click “Next”. 8. Read the instructions and tick the check boxes as desired. Then click on More Options and tick the check boxes as desired. 9. Click “Finish” to finish the installation of Windows Media Player 10.
WINDOWS MEDIA PLAYER 11 INSTALLATION Once you have installed Windows Media Player 11, you can transfer MP3 files, WMA files and WMA files with DRM 9 or 10 to your player using the “Sync” function. 1. Insert the installation CD-Rom into the CD Drive, then the installation screen will appear. If the installation screen doesn't automatically appear, double-click My Computer then double-click on the CD drive, then the installation screen will appear. Click “Download Windows Media Player”. 2.
WINDOWS MEDIA PLAYER 11 INSTALLATION 4. Read the License Agreement, then click “I Accept”. 5. Installation will continue. 6. At the Welcome screen, it is recommended to select “Express Settings” and then click on “Finish”. The newly-installed Windows Media Player 11 will open. You may also see a popup window asking, “A Windows Media Player update is available. Do you want to update now?” Follow the on-screen prompts if you choose to update at this time.
DOWNLOADING AND TRANSFERRING FILES TRANSFERRING FILES You can download digital music files from the Internet or use encoding software to convert music that you have on an audio CD into MP3 or WMA format. Once these files are stored on your computer you can easily copy them to your player. If you have already installed WMP (Windows Media Player) 10 or 11, you can transfer music files (MP3, WMA and/or WMA files with DRM 9 or 10) to the player through the "Sync" function of WMP 10 or 11.
DOWNLOADING AND TRANSFERRING FILES (CONT.) For Windows XP, you can also utilize the previously installed Windows Media Player 10 software to convert music on an audio CD into MP3 or WMA format as follows: 1. Open the Windows Media Player 10 Browser, then click on the “Rip” icon on the top tool bar. Insert a Music CD into the CD-Rom drive of your computer. 2. Click on the “Tools” menu option at the top menu bar, then click on “Options”; the Option setting menu will appear.
DOWNLOADING AND TRANSFERRING FILES (CONT.) TRANSFERRING MP3/WMA/WMA FILES WITH DRM 9 OR DRM 10 USING WINDOWS MEDIA PLAYER 10 (FOR WINDOWS XP ONLY) To transfer MP3/WMA/WMA files with DRM 9 or 10 to the player, follow the procedure described below using the previously installed WMP (Windows Media Player) 10. Before beginning the procedure, please connect the unit to the computer as previously described. 1. Open the “Windows Media Player Browser 10” and click on “Sync”. 2.
DOWNLOADING AND TRANSFERRING FILES (CONT.) CREATING A PLAYLIST USING WINDOWS MEDIA PLAYER 10 Follow the steps below to create a playlist for the Playlist option in the menu, using WMP (Windows Media Player) 10: 1. Connect your player to the USB port on your computer as shown on page 7. Open WMP 10. 2. Go to the "Sync" page and click "Set Up Sync". There you can set up the specific synchronization for this unit. 3. Click "Synchronize Device Automatically" and select the playlist.
OPERATION HOLD SWITCH TURNING THE POWER ON/OFF 1 1 Turn the unit on by pressing the Power/ Play/Pause ®p button; the Memorex start screen will appear in the display temporarily. Then “Play All” will appear in the display. To turn the unit off, press and hold the Power/ Play/Pause ®p button; “Shutting Down” will appear in the display. HEADPHONES JACK With the unit on, slide the HOLD switch to the Hold position (down); no buttons will function.
OPERATION (CONTINUED) TO LISTEN TO MP3s/WMAs 1 2 Turn the unit on by pressing the Power/ Play/Pause ®p button; the Memorex start screen will appear in the display temporarily. Then “Play All” will appear in the display.
OPERATION (CONTINUED) TO PAUSE PLAYBACK 1 2 During playback and while in the “Now Playing” screen, if you wish to pause the file momentarily, press the Power/Play/Pause ®p button; playback will pause. Press the Power/Play/Pause ®p button again to resume playback; the sound will return. 1 2 TO SELECT/BROWSE THROUGH THE FILES 1 3 4 2 If you are not already in the Main menu, press the MENU button 1.
OPERATION (CONTINUED) FORWARD/REVERSE SKIP 1 2 During playback, press the Navigation ®/Skip/Search n button 1 to advance the player to the beginning of the next file. Press the Navigation ®/Skip/Search n button 1 repeatedly to advance the player to highernumbered files. During playback, press the Navigation √/Skip/Search o button 2 to move the player back to the beginning of the currently playing file.
OPERATION (CONTINUED) SETTING THE EQUALIZER 1 2 1 3 4 2 2 4 3 3 1 Scroll to Equalizer by pressing the Navigation ®/Skip/Search n 1 or √/o 2 button then press the Power/Play/Pause ®p button 3. If you are not already in the Main menu, press the MENU button 1. Scroll to Settings by pressing the Navigation ®/Skip/Search n 2 or √/o 3 button then press the Power/ Play/Pause ®p button 4.
OPERATION (CONTINUED) SETTING THE PLAY MODE 1 2 1 3 4 2 2 2 3 1 Scroll to Repeat by pressing the Navigation ®/Skip/Search n 1 or √/o 2 button then press the Power/Play/Pause ®p button 3. If you are not already in the Main menu, press the MENU button 1. Scroll to Settings by pressing the Navigation ®/Skip/Search n 2 or √/o 3 button then press the Power/ Play/Pause ®p button 4.
OPERATION (CONTINUED) SETTING THE SCREEN TIME 1 2 1 3 4 If you are not already in the Main menu, press the MENU button 1. Scroll to Settings by pressing the Navigation ®/Skip/Search n 2 or √/o 3 button then press the Power/ Play/Pause ®p button 4. 3 2 3 2 2 3 1 Scroll to Screen Time by pressing the Navigation ®/Skip/Search n 1 or √/o 2 button then press the Power/Play/Pause ®p button 3.
OPERATION (CONTINUED) SETTING THE POWER SAVINGS 1 2 1 3 4 2 2 4 3 3 1 Scroll to Power Savings by pressing the Navigation ®/Skip/Search n 1 or √/o 2 button then press the Power/Play/Pause ®p button 3. If you are not already in the Main menu, press the MENU button 1. Scroll to Settings by pressing the Navigation ®/Skip/Search n 2 or √/o 3 button then press the Power/Play/Pause ®p button 4.
OPERATION (CONTINUED) SETTING THE LANGUAGE 1 2 1 3 4 2 2 4 3 3 1 Scroll to Language by pressing the Navigation ®/Skip/Search n 1 or √/o 2 button then press the Power/Play/Pause ®p button 3. If you are not already in the Main menu, press the MENU button 1. Scroll to Settings by pressing the Navigation ®/Skip/Search n 2 or √/o 3 button then press the Power/ Play/Pause ®p button 4.
OPERATION (CONTINUED) TO RESTORE THE DEFAULT SETTINGS 1 2 1 3 4 2 2 4 3 3 1 Scroll to Load Default by pressing the Navigation ®/Skip/Search n 1 or √/o 2 button then press the Power/Play/Pause ®p button 3. If you are not already in the Main menu, press the MENU button 1. Scroll to Settings by pressing the Navigation ®/Skip/Search n 2 or √/o 3 button then press the Power/ Play/Pause ®p button 4.
OPERATION (CONTINUED) TO VIEW THE SYSTEM INFO (ABOUT) 1 1 3 4 2 2 2 3 1 Scroll to About by pressing the Navigation ®/Skip/Search n 1 or √/o 2 button then press the Power/Play/Pause ®p button 3. If you are not already in the Main menu, press the MENU button 1. Scroll to Settings by pressing the Navigation ®/Skip/Search n 2 or √/o 3 button then press the Power/ Play/Pause ®p button 4. The unit will then display the Version.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. No sound. The computer is not recognizing the player. WMA files with DRM can’t playback. CAUSE Battery is low/empty. Unit is not turned on. Headphones are not inserted. Volume is set too low. The MP3 or WMA files are corrupted. No files are in the player. The player is not securely connected. Computer is not compatible. Incorrect downloading methods.
TROUBLESHOOTING GUIDE (CONTINUED) SYMPTOM No buttons work. Unit acting erratically. CAUSE The Hold feature is activated. Unit needs to be reset or firmware needs to be updated. Unit needs to be reset or firmware needs to be updated. 30 SOLUTION Deactivate Hold feature as described on page 18. Reset unit and/or update firmware, see page 32. Reset unit and/or update firmware, see page 32.
FORMATTING THE PLAYER Formatting the Player WARNING! Do not format this player unless it stops working and you are instructed to do so by technical support personnel. 1. Use the USB cable to connect the player and the computer. 2. Double click on My Computer, then right click “MMP8000 series and left click on "Format". 3. At the "Format" window, click OK to confirm and the player will start to format (see figure above right). When finished, click "OK" to close the Format window.
RESETTING THE UNIT If the unit acts erratically, reset the unit by inserting a thin object (such as a paper clip) into the recessed Reset hole. See page 6 for the Reset hole's location. FOR FIRMWARE UPGRADE Please visit our Web site at www.memorexelectronics.com to check if there is new firmware available. IMPORTANT NOTE: Before upgrading the firmware, please backup all of your media files on your computer. After upgrading, format the unit to complete the upgrade procedure.
Audio File Support General SPECIFICATIONS Frequency Range Headphones Output S/N Ratio MP3 WMA Dimension Weight USB Built-in Memory Max. Playtime Supported OS Operating Temperature Built-in Battery 20Hz–20KHz 5mW, 32ohm (Max. Vol) 85db (MP3) MPEG 1/2/2.5 Layer 3 with a Bit Rate of 32-320 kbps Windows Media Audio (WMA file with DRM 9 or DRM 10) with a Bit Rate of 48-192 kbps 1.5 (W) x 1.7 (L) x 0.6 (Thickness) inches 0.7 ounce USB 2.0 2 GB Approx.
FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE. FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR IMATION ELECTRONICS PRODUCTS.
ÍNDICE Precauciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Declaración de la FCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pautas EIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Ubicación de los Controles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Carga de las Pilas. . . . . . . . . .
PRECAUCIONES DERECHO DE AUTOR: La distribución de copias de pistas con formato MP3, WMA, WMA con DRM y/o archivos • WMV sin autorización constituye una violación a las leyes internacionales de derechos de autor. SEGURIDAD: • La vibración experimentada al caminar o hacer ejercicio no afectará al reproductor. Sin embargo, dejar caer el reproductor o dejar caer un objeto pesado sobre el reproductor puede ocasionar daños o distorsión en el sonido.
DECLARACIÓN DE LA FCC Este aparato cumple con el Apartado 15 de las normas de la FCC. El funcionamiento está sujeto a las siguientes dos condiciones: (1) Este aparato no debe causar interferencia dañina y (2) este aparato debe aceptar cualquier interferencia que reciba, incluso aquella interferencia que pueda causar una operación indeseada.
Estimado Cliente: En el momento en que seleccionó un equipo de tan alta tecnología como el que usted acaba de comprar, su entretenimiento musical recién comenzó. Ahora es tiempo de pensar en cómo puede optimizar el entretenimiento que su equipo le ofrece.
Nivel de Decibeles 30 40 50 60 70 80 Ejemplo Una biblioteca, susurros. Sala, refrigerador, dormitorio lejos del tráfico. Semáforo, conversación normal, oficina tranquila. Aire acondicionado a 20 pies, máquina de coser Aspiradora, secadora de pelo, restaurante bullicioso. Tráfico en la calle, triturador de basura, alarma de reloj a 60 cm. 90 100 120 140 180 Metro, motocicletas, tráfico de camiones, podadora de césped. Camión de basura, sierra eléctrica, perforadora neumática.
UBICACIÓN DE LOS CONTROLES 1 9 2 3 4 5 10 11 6 7 8 1. Entrada de USB (Parte superior de la unidad) (CABLE USB - PIEZA NO. 2. Sujetador para Cinturón (Parte trasera de la unidad) Orificio para Reinicio (Reset) (Parte lateral de la unidad) Botón de Volumen - (Volume -) Botón de MENÚ Pantalla Botón de Encender/ Reproducir/Pausar (Power/Play/Pause) ®p Botón de Navegación √/Salto/ Búsqueda (Salto/Búsqueda) o 3. 4. 5. 6. 7. 8. 12 9.
RECARGAR LA BATERÍA Esta unidad posee una pila recargable incorporada de Polímeros de Litio. Cuando las barras del indicador de la pila (en la pantalla) estén bajas (vea la Figura 1), recarge la pila del siguiente modo: 1. Conecte el cable USB en la entrada de USB en la parte superior de la unidad (como indica la ilustración) y en el puerto USB de su computadora; el mensaje “✓ Puede extraer” (OK to Remove) aparecerá en la pantalla.
INSTALACIÓN DEL SOFTWARE CD de Instalación del Software (PIEZA NO. CTPCDMEMO081001-0-00*) Información General Esta unidad es compatible con Microsoft Windows XP (Edición Hogar o Profesional con Service Pack 2 o superior) o Vista. Utilice el CD para instalar Windows Media Player (10 or 11). NOTA IMPORTANTE: • Para Mac OS X: Esta unidad es compatible también con Mac OS X; sin embargo Windows Media Player 10 y 11 no puede utilizarse con Mac OS X.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 10 Windows Media Player 10 sólo puede utilizarse con Windows XP. Consulte la página 12 para saber como instalar Windows Media Player 11. (Los usuarios de Windows Vista deben utilizar Windows Media Player 11) Una vez que haya instalado Windows Media Player 10, podrá transferir archivos MP3, WMA y WMA con DRM 9 o 10 a su reproductor utilizando la función “Sync”. 1. Introduzca el CD-Rom de instalación en la unidad de CD, aparecerá la pantalla de instalación.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 10 4. La instalación continuará. 5. En la pantalla de bienvenida, haga clic en SIGUIENTE. 6. Seleccione las opciones de privacidad deseadas.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 10 7. Haga clic en la Declaración de privacidad para verla, si así lo desea. Cuando termine, haga clic en “Siguiente”. 8. Lea las instrucciones y active las casillas de verificación deseadas. Luego haga clic en Más opciones y active las casillas de verificación deseadas. 9. Haga clic en “Finalizar” para finalizar la instalación del Reproductor de Windows Media 10.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 11 Una vez que haya instalado Windows Media Player 11, podrá transferir archivos MP3, WMA y WMA con DRM 9 o 10 a su reproductor utilizando la función “Sync”. 1. Introduzca el CD-Rom de instalación en la unidad de CD, aparecerá la pantalla de instalación. Si no aparece automáticamente la misma, haga doble clic en Mi PC, luego doble clic en unidad de CD. Aparecerá la pantalla de instalación.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 11 4. Lea el Contrato de Licencia, luego haga clic en “Acepto”. 5. La instalación continuará. 6. En la pantalla de Bienvenida, se recomienda seleccionar “Configuraciones rápidas” (“Express Settings”) y luego hacer clic en “Finalizar” (“Finish”). Se abrirá el Windows Media Player 11 recién instalado. También es probable que aparezca una ventana emergente que le pregunte: “Existe una actualización de Windows Media Player disponible.
DESCARGAR Y TRANSFERIR ARCHIVOS TRANSFERIR ARCHIVOS Puede descargar archivos de música digital desde Internet o utilizar un software de codificación para convertir la música que tiene un disco de audio a formato MP3 o WMA. Una vez que haya guardado estos archivos en su computadora, puede copiarlos fácilmente en su reproductor.
DESCARGAR Y TRANSFERIR ARCHIVOS (CONT.) Para Windows XP, puede utilizar el software Reproductor de Windows Media 10 anteriormente instalado para convertir la música en un CD de audio a formato MP3 o WMA, del siguiente modo: 1. Abra el explorador de Reproductor de Windows Media 10, luego haga clic en el icono de “Copiar desde CD” en la barra de herramientas superior. Introduzca un CD de música en la unidad de disco CD-ROM de su computadora. 2.
DESCARGAR Y TRANSFERIR ARCHIVOS (CONT.) TRANSFERENCIA DE ARCHIVOS MP3/WMA/WMA CON DRM 9 O DRM 10 USANDO WINDOWS MEDIA PLAYER 10 (SÓLO PARA WINDOWS XP) Para transferir archivos MP3/WMA//WMA con DRM 9 o 10 al reproductor utilizando el WMP (Windows Media Player) 10 instalado antes, siga las siguientes instrucciones. Antes de comenzar conecte la unidad a la computadora como se indicó anteriormente. 1. Abra el “Navegador para Windows Media Player 10” (Windows Media Player Browser 10) y haga clic en “Sync”. 2.
DESCARGAR Y TRANSFERIR ARCHIVOS (CONT.) CREAR UNA LISTA DE REPRODUCCIÓN UTILIZANDO WINDOWS MEDIA PLAYER 10 Siga las siguientes instrucciones para crear una lista de reproducción para la opción Lista de reproducción (Playlist) del menú , utilizando WMP (Windows Media Player) 10: 1. Conecte el reproductor al puerto USB en su computadora como se muestra en la página 7. Abra el WMP 10. 2. Vaya a la página “Sincronización” y haga clic en “Configurar sincronización”.
OPERACIÓN BLOQUEO DE TECLAS ENCENDIDO/APAGADO (ON/OFF) 1 1 Encienda la unidad presionando el botón Encender/Reproducir/Pausar (Power/Play/ Pause) ®p; la pantalla de inicio de Memorex aparecerá temporalmente. Luego aparecerá “Reproducir todos” (Play All) en la pantalla. Para apagar la unidad, mantenga oprimido el botón Encender/Reproducir/Pausar (Power/Play/ Pause) ®p; en la pantalla aparecerá “Apagando” (Shutting Down).
FUNCIONAMIENTO (CONTINÚA) PARA ESCUCHAR MP3s/WMAs 1 2 Encienda la unidad presionando el botón Encender/Reproducir/Pausar (Power/Play/ Pause) ®p; la pantalla de inicio de Memorex aparecerá temporalmente. Luego aparecerá “Reproducir todos” (Play All) en la pantalla.
FUNCIONAMIENTO (CONTINÚA) PARA PAUSAR LA REPRODUCCIÓN 1 2 Durante la reproducción y mientras esté en la pantalla “Reproduciendo ahora” (Now Playing), si desea pausar momentáneamente el archivo, oprima el botón Encender/Reproducir/Pausar (Power/Play/Pause) ®p para que se pause la reproducción. Oprima nuevamente el botón Encender/ Reproducir/Pausar (Power/Play/Pause) ®p para reanudar la reproducción; el sonido volverá.
FUNCIONAMIENTO (CONTINÚA) SALTO ADELANTE/ATRÁS 1 2 Durante la reproducción, presione el botón de navegación ®/Saltar/Buscar (Skip/Search) n 1 para avanzar el reproductor al inicio del próximo archivo. Presione repetidamente el botón de navegación ®/Saltar/Buscar (Skip/Search) n 1 para avanzar el reproductor a un archivo de número más alto. Durante la reproducción, presione el botón de navegación √/Saltar/Buscar (Skip/Search)o 2 para mover el reproductor de regreso al inicio del archivo actual.
FUNCIONAMIENTO (CONTINÚA) CONFIGURAR EL ECUALIZADOR 1 2 1 3 4 2 2 4 3 3 1 Desplácese hasta Ecualizador (Equalizer) usando el botón de navegación ®/Saltar/Buscar (Skip/Search) n 1 o √/o 2, luego oprima el botón Encender/Reproducir/ Pausar (Power/Play/Pause) ®p 3. Si aún no está en el menú principal, oprima MENÚ 1.
FUNCIONAMIENTO (CONTINÚA) CONFIGURAR EL MODO DE REPRODUCIR 1 2 1 3 4 2 2 2 3 1 Desplácese hasta Repetir (Repeat) usando el botón de navegación ®/Saltar/Buscar (Skip/Search) n 1 o √/o 2, luego oprima el botón Encender/Reproducir/Pausar (Power/Play/Pause) ®p 3. Si aún no está en el menú principal, oprima MENÚ 1.
FUNCIONAMIENTO (CONTINÚA) CONFIGURACIÓN DE LA HORA DE LA PANTALLA 1 2 1 3 4 Si aún no está en el menú principal, oprima MENÚ 1. Desplácese hasta Configuraciones (Settings) usando el botón de navegación ®/Saltar/Buscar (Skip/Search) n 2 o √/o 3, luego oprima el botón Encender/Reproducir/ Pausar (Power/Play/Pause) ®p 4.
FUNCIONAMIENTO (CONTINÚA) AJUSTE DE AHORRO DE ENERGÍA 1 2 1 3 4 2 2 4 3 3 1 Desplácese hasta Ahorro de energía (Power Savings) usando el botón de navegación ®/Saltar/Buscar (Skip/Search) n 1 o √/o 2, luego oprima el botón Encender/Reproducir/Pausar (Power/Play/Pause) ®p 3. Si aún no está en el menú principal, oprima MENÚ 1.
FUNCIONAMIENTO (CONTINÚA) CONFIGURAR EL IDIOMA 1 2 1 3 4 2 2 4 3 3 1 Desplácese hasta Idioma (Language) usando el botón de navegación ®/Saltar/Buscar (Skip/Search) n 1 o √/o 2, luego oprima el botón Encender/Reproducir/Pausar (Power/ Play/Pause) ®p 3. Si aún no está en el menú principal, oprima MENÚ 1. Desplácese hasta Configuraciones (Settings) usando el botón de navegación ®/Saltar/Buscar (Skip/Search) n 2 o √/o 3, luego oprima el botón Encender/ Reproducir/Pausar (Power/Play/Pause) ®p 4.
FUNCIONAMIENTO (CONTINÚA) RESTABLECER LA CONFIGURACIÓN PREDETERMINADA 1 2 1 3 4 2 2 Si aún no está en el menú principal, oprima MENÚ 1. Desplácese hasta Configuraciones (Settings) usando el botón de navegación ®/Saltar/Buscar (Skip/Search) n 2 o √/o 3, luego oprima el botón Encender/Reproducir/ Pausar (Power/Play/Pause) ®p 4.
FUNCIONAMIENTO (CONTINÚA) PARA VER LA INFORMACIÓN DEL SISTEMA (ABOUT - ACERCA DE) 1 2 1 3 4 2 Si aún no está en el menú principal, oprima MENÚ 1. Desplácese hasta Configuraciones (Settings) usando el botón de navegación ®/Saltar/Buscar (Skip/Search) n 2 o √/o 3, luego oprima el botón Encender/Reproducir/ Pausar (Power/Play/Pause) ®p 4.
GUÍA DE RESOLUCIÓN DE PROBLEMAS Si la unidad presenta algún inconveniente, lea la siguiente tabla antes de llamar al servicio técnico. PROBLEMA CAUSA La unidad no enciende. La pila está baja/ descargada. SOLUCIÓN Recargue la pila como se describe en la pág. 7. Sin sonido. Inserte los audífonos. La unidad está apagada. Oprima Encender/Reproducir/ Pausar ®p. Los audífonos no están conectados. El volumen está muy bajo. Los archivos MP3 o WMA están corruptos. No hay archivos en el reproductor.
GUÍA DE RESOLUCIÓN DE PROBLEMAS (CONTINÚA) PROBLEMA CAUSA No funcionan los botones. La función de bloqueo está activada. La unidad actúa erráticamente. Debe reiniciar la unidad o necesita actualizar el firmware. SOLUCIÓN Desactive la función de bloqueo, ver página 18. Reinicie la unidad y/o actualice el firmware, ver página 32. Debe reiniciar la unidad Reinicie la unidad y/o o necesita actualizar el actualice el firmware, ver firmware. página 32.
FORMATEAR EL REPRODUCTOR Formatear el reproductor ¡ADVERTENCIA! No formatee el reproductor a menos que deje de funcionar y se lo indique el personal de soporte técnico. 1. Use el cable USB para conectar el reproductor y la computadora. 2. Haga doble clic en Mi PC, luego haga clic con el botón derecho del mouse en “MMP8000series” y clic con el botón izquierdo en “Formatear” (Format). 3. En la ventana “Formatear” (“Format”), haga clic en OK para confirmar.
REINICIAR LA UNIDAD Si la unidad funciona incorrectamente, restablézcala introduciendo un objeto punzante (como un clip) en el hueco de Restablecer. Consulte la página 6 para conocer la ubicación del hueco para Restablecer. ACTUALIZAR EL SOFTWARE DEL FABRICANTE Visite nuestro sitio web en www.memorexelectronics.com para revisar si existe una versión más nueva del firmware. NOTA IMPORTANTE: Antes de actualizar el firmware, respalde todos sus archivos en su computadora.
ESPECIFICACIONES Audio Formato de Archivo Compatible: General Rango de Frecuencia Salida para Auriculares Relación Señal/Ruido MP3 WMA Tamaño Peso USB Memoria Integrada Tiempo Máximo de Reproducción Sistema Operativo Compatible Temperatura en Funcionamiento Pila Integrada 20Hz-20KHz 5mW, 32ohm (Vol. Max.) 85db (MP3) MPEG 1/2/2.
PARA OBTENER LA ACTUALIZACIÓN DEL FIRMWARE, VISITE NUESTRO SITIO WEB EN WWW.MEMOREXELECTRONICS.COM PARA REVISAR SI HAY UN FIRMWARE NUEVO DISPONIBLE. PARA OBTENER AYUDA ADICIONAL CON RESPECTO A LOS AJUSTES O LA OPERACIÓN, VISITE NUESTRO SITIO WEB EN: WWW.MEMOREXELECTRONICS.COM O COMUNÍQUESE CON SERVICIO AL CLIENTE AL 1-800-919-3647. CONSERVE LA CAJA AL MENOS DURANTE 90 DÍAS POR NECESITA DEVOLVER EL PRODUCTO A SU DISTRIBUIDOR O IMATION ELECTRONICS PRODUCTS.