MD6883 User’s Guide PERSONAL AM/FM STEREO/COMPACT DISC PLAYER WITH 45 SECOND DIGITAL ANTI-SHOCK PROTECTION Before operating this product, please read these instructions completely.
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY PRECAUTIONS (CONTINUED) INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
LOCATION OF CONTROLS 1 2 3 4 5 6 12 13 14 15 16 7 8 17 9 18 10 19 11 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Display Skip/Search/Tuning n Button Skip/Search/Tuning o Button PRESET DOWN Button PROG (Program) Button ESP/BAND Button LINE OUT Jack (Side of Unit) PHONES (Headphones) Jack (Side of Unit) VOLUME Control DBBS Switch CD OPEN Switch DC 4.5V Jack (Rear of Unit) 13. PLAY/PAUSE (®p)/POWER ON Button 14. STOP (■)/POWER OFF Button 15. PRESET UP Button 16. MODE Button 17. CD Compartment 18.
POWER SOURCES This CD player requires either two (2) “AA” size batteries (not included) or an AC adapter (not included). BATTERY INSTALLATION The battery indicator ( ) will appear in the CD display when the batteries need replacing. 1. Open the battery compartment door on the bottom of the unit by sliding it out and lifting – up. To prevent the possibility of losing the cover, it cannot be removed. 2.
OPERATION BASS BOOST TURNING POWER ON/OFF 1 1 To emphasize the bass, slide the DBBS switch to the ON position. For normal bass, slide the DBBS switch to the OFF position. 1 To turn the unit on, press the PLAY/PAUSE ( ®p )/POWER ON button 1. To turn the unit off, Press the STOP (■)/POWER OFF button 2. 1 2 1 1 1 AUTO POWER OFF When the unit is stopped (Standby mode) for approximately one minute, the power will automatically turn off.
RADIO OPERATION TO LISTEN TO THE RADIO 1 2 2 2 3 1 1 Set the VOLUME control 1 to minimum and plug the headphones into the PHONES jack. Press the PLAY/PAUSE (®p)/POWER ON button 2 to turn the unit on. 1 Slide the FUNCTION switch 1 to the RADIO position. Press the ESP/BAND button 2 to select a band (AM or FM). If listening to FM, 1 press the MODE button 3 to turn FM Stereo ON or OFF. 1 2 3 4 2 3 1 1 2 Adjust the VOLUME control 1 and DBBS switch 2 as desired.
RADIO OPERATION (CONTINUED) TO SET AND RECEIVE A STATION INTO MEMORY You can set up to 10 AM and 10 FM stations into memory as follows: 2 1 2 1 3 Tune a desired station as described in the previous section. Press the PROG button; the PROG indicator will blink and the preset number will appear in the display. While the PROG indicator is blinking, select the desired preset using the PRESET UP 1 or DOWN 2 button, then press the PROG button 3 to set the memory.
CD OPERATION TO PLAY A CD (Standard, CD-R and CD-RW) 2 1 2 1 Press the PLAY/PAUSE (®p)/POWER ON button to start playback. To pause playback, press the PLAY/PAUSE ( ®p )/POWER ON button again, the elapsed time will blink. Press once 2 again to resume playback. 3 4 3 1 Open the CD compartment lid by sliding the CD OPEN switch 1 to the right. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the PHONES jack.
CD OPERATION (CONTINUED) NOTES: • This unit is capable of playing standard CDs or 3” singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show “no disc”. • As each track is played, the track number and elapsed time are shown in the display. • To remove the disc, open the CD compartment, hold the edge of the CD and gently press the center pivot and lift the CD. • The maximum time of a CD is 74 minutes for this unit.
CD OPERATION (CONTINUED) 5 6 If the CD player is subject to vibration during playback, the bars will disappear one by one. During the vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc. At this time, the indicator will probably show fewer bars indicating the music signals stored in memory are low. If all the bars disappear and the CD player is subject to immediate vibration, the unit may skip.
CD OPERATION (CONTINUED) TO REPEATEDLY PLAY BACK ONE TRACK 1 2 3 4 2 1 1 2 3 The unit will then play the same track over and over until the STOP (■)/POWER OFF button 1 is pressed. 4 Adjust the VOLUME control 2 and 2 DBBS switch 3 as desired. 1 With a CD inserted, press the PLAY/PAUSE (®p)/POWER ON button 1 to turn the unit on, then select a track using the Skip/Search/Tuning o 2 or n 3 button. Press the MODE button 4 once; the Repeat 1 indicator ALL will appear in the display.
CD OPERATION (CONTINUED) INTRO PLAY 1 2 1 1 4 2 3 2 3 Press the PLAY/PAUSE (®p)/POWER ON button 1 to begin playback. The unit will play the first 10 seconds of each track. Adjust the VOLUME control 2 and MBASS switch 3 as desired. Press the STOP (■)/POWER OFF button 4 to stop Intro playback. 3 With a CD inserted, press the PLAY/PAUSE ( ®p )/POWER ON button 1 to turn the unit on and press the STOP (■)/POWER OFF button 2 to stop auto playback.
CD OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 24 TRACKS) 1 2 1 2 1 3 2 3 With a CD inserted, press the PLAY/PAUSE (®p)/POWER ON button 1 to turn the unit on and press the STOP (■)/POWER OFF button 2 to stop auto playback. Press the PROG button 3; the PROG indicator will appear in the CD display. Select the first track to be played back using the Skip/Search/Tuning o 1 or n 2 button, then press the PROG button 3 again.
CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. If necessary, use a CD cleaning kit.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. Disc will not play. Erratic CD playback. No sound from headphones. ESP not working. Noise or sound distorted on radio. FM STEREO indicator does not light. No sound. CAUSE Weak or dead batteries or inserted incorrectly. Weak or dead rechargeable batteries. AC adapter not connected. CD compartment not closed. Disc inserted incorrectly. Dirty or defective disc.
SPECIFICATIONS Power requirements......................................2 x LR6 "AA" alkaline battery DC in 4.5V adapter (center positive) Frequency Range (FM) ................................................... 87.5 ~ 108 MHz Frequency Range (AM) ....................................................530 ~ 1720 KHz D/A conversion ...................................1-bit DAC eight times oversampling Frequency response ............................................20~20,000Hz (+1,-3 dB) Anti-shock. ...............
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.