User Guide

8
OPERATION
With an iPod
®
connected (see previous
page), turn the Mi4002 on by pressing
the POWER button (if it is not on
already); the iPod
®
icon will appear in
the display if the unit is in the iPod
®
mode.
NOTE: If the Mi4002 is in a mode other
than iPod
®
, press the iPod
®
button to
select iPod
®
mode.
1
1
1
Operate the iPod
®
as per its
owner’s manual and the sound will
be heard through the Mi4002’s
speakers.
Adjust the volume as desired by
pressing the Volume Up/Down
buttons.
1
1
2
When done, press the POWER
button and also turn off the iPod
®
.
1
1
3
USING AN IPOD
®
WITH THIS UNIT
NOTES:
• When the iPod
®
is inserted into the
dock, you can press the TUNE
Up/Down/Skip
n / o buttons to
skip to the beginning of the current
track/previous or next track. You
can also press the
PLAY/PAUSE/M-UP button to
pause/resume playback.
• You can select an EQ setting by
pressing the EQ button to cycle
through CLASSIC, JAZZ, ROCK
and POP. (You can use this feature
in all other modes, as well.)
• The default volume setting level is
18. After you have adjusted the
volume setting, if you turn the unit
off and then on again, the volume
level will be set back to the default
level of 18.