USER’S GUIDE 15” LCD MONITOR 1
IMPORTANT SAFETY INFORMATION Read all of these instructions carefully, and save them for reference. Follow all warnings and instructions marked on the product. Unplug the monitor from the system unit before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Use only attachments recommended by the manufacturer; unapproved attachments may be hazardous.
and unused for long periods of time, unplug it from the system unit. This will prevent damage to the monitor from lightening and power surges. Do not overload power outlet and extension cords. Overload can result in fire or electric shock. Never push any object into the slot in the monitor cabinet. It could touch dangerous voltage points or short out parts resulting in a fire or electric shock. Never spill liquid on the monitor.
FCC Class B Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules; These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1. INTRODUCTION 1.1 GENERAL INFORMATION The monitor is a 15.0-inch intelligent LCD monitor with ultra high resolution of up to 1024 x 768. The microprocessor-based design was implemented with the user in mind. We invite you, the proud new owner of this fine monitor, to read this user’s manual before operating, in order to get the most out of this product. 1.
3. button. Press (AUTO/EXIT) key to make this item adjustable. Adjust the item that you selected by pressing left & right button. OSD FUNCTIONS ?? Auto Adjust: Auto geometry setting ?? Phase / Clock: Adjust the vertical position of the picture and the picture Clock. ?? H / V Position: Adjust the horizontal and vertical position of the picture. ?? Misc: Adjust by User ?? Reset: Reset to original factory color and geometry setting.
?? Brightness Hot Key Function Press left button to adjust the brightness directly. ?? Contrast Hot Key Function Press right button to adjust the contrast directly. ?? Power Button ( ) Press ( ) to turn the power on or off. ?? Power LED The green light of power LED indicates the power is switched on and the power cord is properly connected. The red light indicates it’s in no signal applied or improper connection of the signal cable. 3.
Suspend OFF Yes No No No Blanked Amber Blanked Amber <3W <3W 5. TROUBLESHOOTING Problem: No picture appears on the screen. ?? ?? ?? If power LED is off, check if power cable is securely connected. If power LED is amber in color, check if VGA cable is properly connected. Adjust the brightness and contrast controls. Problem: Picture is unstable (noise, jitter etc) ?? ?? ?? Check the timing of your computer and see if they are compatible with Monitor.
Environment: 1. Operating Temperature: 10°C to 40°C 2. Operating Humidity: 10% to 85% 3. Storage temperature: -20°C ~ 60°C Weight: Approx. 2.
