Memorex MM1720 17" Color Monitor Operation Manual Please read the operation manual carefully before using 1
Contents Introduction Preface……………………………………………………………………………………………..2 Features……………………………………………………………………………………………..2 Safety Specifications Warning……………………………………………………………………………………………..2 Safety procedure…………………………………………………………………………………..3 Operation directory Operation Instructions……………………………………………………………………………..3 Introduction of function keys………………………………………………………………..4 Three-brightness-mode ………………………………………………………………..
Welcome to use the high-resolution monitor of our company. This manual includes matters concerning usage and operation of the monitor. Please read this manual carefully so that your monitor can work perfectly.
Statement： This is product grade A, it maybe cause radio interference during work ambierce? And user probably will have to take some reasonable anti-interference measurements under this condtion. 1． .Before connecting the power supply , you should confirm that the local ammeter meets the requirements of monitor。 2． .In order to prevent electricity shock, do not touch the inner of the monitor .
14．.AC power supply outlet should be putted near to the monitor, and in your reach, so that you can cut off the power supply in time。 Operation instructions： Connect with the computer： 一、Do turn off the pc and power supply when you connect system。 二、Please operate according to the following procedures when you connect monitor with your system。 1． Connect the power cord for your monitor to the power port on the back of the monitor plug the power cord for the monitor into a nearby outlet.。 2． .
*Three- brightness-mode: Three-brightness-mode technology is adopted for optimum display performance with multiple applications. use the handy hot key,“EXIT/H.B” button, to toggle quickly between soft, standard and rich vibrant colour level for different needs and usage, Step1：When there is no menu on the screen, you can enter the mode choice menu among gentle standard and light, by pressing the key “EXIT/H.B”, and you can call in the mode of last time.
Menu function and description To vary the difference between the display’s light and dark Contrast elements Brightness To adjust the overall intensity of the display。 Zoom Enlarge or reduce the picture H-position To center the image horizontally on the screen V-position Centers the image vertically on the screen H-size Makes the image wider or narrower V-size .
shown time plus 5 with the unit is Second Switch-over of language is indicated by menu, Language including English, Chinese and other 6 languages etc Degauss Degauss manually .Use this selection to return to the initial factory Memory Recall RF setting .but limited to the mode specified in appendix .Exit OSD adjustment, memorize the value of the Exit EXIT current setup Note：The vertical and horizontal moiré values in the menu are preset by factory.
The following figure is the view looking into the pin end of video connector The following table provides the pin numbers and corresponding pin assignments for video connector with the DDC2B capability:： Number RGB Mode Signal Signal Pin 1 RED Pin# 1 2 Green Pin# 2 3 Blue Pin# 3 4 Ground Pin# 4 5 Ground Pin# 5 6 Red Ground Pin# 6 7 Green Ground Pin# 7 8 Blue Ground Pin# 8 9 Empty Pin# 9 10 Sync Ground Pin# 10 11 Empty Pin# 11 12 Bi-Directional Data(SDA) Pin# 12 13 H
Other specification and Parameters： .Display color unlimited Max resolution（PROGRESSIVE SCAN） 1600*1200（Refresh f frequency 60Hz） Sync Input Signal Separate H/V sync. TTL level, positive or negative Video input signal RGB, Video Broadband 160MHz Power Analog （0.
The is correct or not the array of stitch。 Adjusted improperly or not Adjust the image(see the monitored above) menu is too big, small, or floating The setting of Depart the appendix setting mode Choose the identical appendix menu is not or not mode as follows again ideal Use the OSD menu to readjust the setting required Appendix： .This product can automatically determine and display different kind of video display standards.
