TABLE OF CONTENTS Operation–Video Playback Mode. . . . . . . 25 • To Watch Videos. . . . . . . . . . . . . . . . . . . 25 • High-Speed Video Search . . . . . . . . . . . 26 • Forward/Reverse Skip . . . . . . . . . . . . . . 26 Operation–Photo Playback Mode . . . . . . 27 • To View Photos. . . . . . . . . . . . . . . . . . . . 27 • Thumbnail View . . . . . . . . . . . . . . . . . . . 28 • Slide Show View. . . . . . . . . . . . . . . . . . . 28 Settings Menu . . . . . . . . . . . . . . . . . . . . . .
PRECAUTIONS COPYRIGHT: • Distributing copies of MP3, WMA with DRM or WAV tracks without permission is a violation of international copyright laws. SAFETY: • Vibration experienced during walking or exercising will not affect the player. However, dropping the player or dropping a heavy object on the player may result in damage or sound distortion. • Avoid spilling any liquid onto or into the player.
FCC DECLARATION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Decibel Level 30 40 50 60 70 80 Example Quiet library, soft whispers Living room, refrigerator, bedroom away from traffic Light traffic, normal conversation, quiet office Air conditioner at 20 feet, sewing machine Vacuum cleaner, hair dryer, noisy restaurant Average city traffic, garbage disposals, alarm clock at two feet THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE: 90 100 120 140 180 Subway, motorcycle, truck traffic, lawn mower Garbage truck, chain saw, pneumatic drill Rock band conce
LOCATION OF CONTROLS 1 7 8 2 9 10 11 3 4 5 6 1. Headphone Jack 2. 3. 4. Display Navigation π Button Navigation √/Skip/Search o Button Navigation † Button USB Jack 5. 6. 7. 12 13 8. 9. 10. 11. 12. 13. (HEADPHONES PART NO. 261-32000-E010*) SOFTWARE DISC PART NO. PA-E558* (USB CABLE PART NO.
CHARGING THE BATTERY This unit has a built-in Lithium Polymer rechargeable battery. When the bars in the battery indicator (in the display) become low (see Figure 1) and especially when the bars turn red, recharge the battery as follows. 1. Connect the USB cable to the USB jack on the bottom of this unit and to the USB port on your computer (as shown); “✓ OK to Remove” will appear on the screen. When charging, the battery indicator will cycle from the current battery level to full.
DOWNLOADING AND TRANSFERRING FILES SUPPORTED OPERATING SYSTEMS This unit is compatible with Windows XP (SP2) with Windows Media Player 10, or above. Please refer to the following pages to learn how to: transfer video, music and photo files, convert music on an audio CD into MP3 or WMA format using Windows Media Player 10, transfer MP3/WMA files and WMA files with DRM 9 or 10 using Windows Media Player 10. NOTE: Visit www.Microsoft.com to download the corresponding Windows Media Player for your computer.
DOWNLOADING AND TRANSFERRING FILES (CONT.) For Windows XP, you can also utilize Windows Media Player 10 software to convert music on an audio CD into MP3 or WMA format as follows: 1. Open the Windows Media Player 10 Browser, then click on the “Rip” icon on the top tool bar. Insert a music CD into the CD-Rom drive of your computer. 2. 3. 4. Click on the “Tools” menu option at the top menu bar, then click on “Options”; the Option setting menu will appear.
DOWNLOADING AND TRANSFERRING FILES (CONT.) TRANSFERRING MP3/WMA/VIDEO/PHOTO FILES AND WMA FILES WITH DRM 9 OR DRM 10 USING WINDOWS MEDIA PLAYER 10 (FOR WINDOWS XP ONLY) To transfer MP3/WMA/VIDEO/PHOTO/WMA files with DRM 9 or 10 to the player, follow the procedure described below using WMP (Windows Media Player) 10. Before beginning the procedure, please connect the unit to the computer as previously described. 1. Open the “Windows Media Player Browser 10” and click on “Sync”. 2.
DOWNLOADING AND TRANSFERRING FILES (CONT.) CREATING A PLAYLIST Follow the steps below to create a playlist in the Music menu: 1. Connect your player to the USB port on your computer as shown on page 7. 2. Press and hold the Enter/Play/Pause ®p button for three seconds. 3. On your computer, double-click My Computer. This unit will appear as a removable drive name "Removable Disk"; double-click "Removable Disk". 4. Navigate to the music files that you want to copy.
INSTALLING MP3 PLAYER UTILITIES 5.10 Procedure to Install MP3 Player Utilities 5.10: 1. Insert the installation CD-Rom into the CD Drive, then the installation screen will appear. If the installation screen doesn't automatically appear, double-click My Computer then double-click on the CD drive, then double-click on “Setup.exe”. 2. The “Welcome” screen will appear. Click “Next”. 3. The “Installation Folder” screen will appear. It is recommended to keep the folder as is.
INSTALLING MP3 PLAYER UTILITIES 5.10 4. The “MP3 Player Utilities 5.10 Information” screen will appear. Read the information and click “Next”. 5. The “Confirm Installation” screen will appear. Click “Next”. 6. After the program is done installing, the “Installation Complete” screen will appear. Click “Close” to end installation. See the next page for how to use MP3 Player Utilities 5.10.
USING MP3 PLAYER UTILITIES 5.10 (Video Converter) Click to add files for conversion Click to select location of output file Setting Icon In this window, place a checkmark in the “Select” column next to the “File name” of any files that you would like to convert. Help Icon Begin Icon You can use the previously installed MP3 Player Utilities 5.10 (Video Converter) to convert your video files to AVI files supported by the player. 1. 2. 3. Open the previously installed MP3 Player Utilities 5.
USING MP3 PLAYER UTILITIES 5.10 (Video Converter) 4. 5. 6. 7. 8. In the window of files to convert, place a checkmark in the “Select” column next to the “File name” of any files that you would like to convert. Then, click on the “Setting” icon (see illustration on the previous page for icon location). Set up the conversion settings, as desired. There are many items in the settings (such as selecting between Full Screen or Same Ratio), most of them do not need to be changed; keep the default settings.
GENERAL OPERATION TURNING THE POWER ON/OFF 1 To turn the unit on, press and hold the Power On/Off button; the Memorex screen will appear for a few moments followed by the Main menu. To turn the unit off, press and hold the Power On/Off button until “Shutting Down” appears in the display. NOTE: The Memorex screen will take several seconds to several minutes to update the player’s library depending on the number of songs that you have transferred to the player.
GENERAL OPERATION (CONTINUED) HEADPHONES JACK VOLUME BUTTONS 1 1 Plug the headphones (included) into the Headphones jack on the top of the unit. 17 To control the volume, simply press the Volume +/- button during playback. NOTE: While changing the volume, the volume “pop up” indicator will be overlaid across the bottom of the existing screen and will disappear from the screen after three seconds if neither Volume button is pressed.
OPERATION–MUSIC PLAYBACK MODE TO LISTEN TO MP3s/WMAs This unit supports the following audio formats: MP3, MPEG 1/2/2.5 Layer 3 with a bit rate of 32320 kbps, WMA files or WMA with DRM 9 or 10 with a bit rate of 48-192 kbps. 1 1 2 2 Turn the unit on and access the main menu as described on page 16. Select Music using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) 3 1 3 2 To browse through your music, see more details below: Play Queue: “Play All”, “Clear All”, “Clear Track” and the song's name will appear in the display. Select Play All or the desired song using the Navigation ▲ 1 and/or ▼ 2 buttons then press the Enter/Play/Pause ®p button 3 to start playback. The unit will play that song and the songs following it. Songs: The song’s name will appear in the display.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) TO DELETE SONGS FROM THE PLAY QUEUE 1 1 2 3 2 Enter the Play Queue submenu as described on page 18. To clear all tracks in the queue, use the Navigation ▲ 1 and/or ▼ 2 button to select Clear All and then press the Enter/Play/Pause ®p button 3. 1 3 2 To clear one track at a time from the queue, use the Navigation ▲ 1 and/or ▼ 2 button to select Clear Track and then press the Enter/Play/Pause ®p button 3.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) HIGH-SPEED MUSIC SEARCH 1 2 1 During playback, press and hold the Navigation ®/Skip/Search n button 1 or √/o 2 button to move the player forward or backward within a file to locate a specific musical passage. The player will move forward or backward at high speed as long as the button is held. When you release the button, normal playback will resume.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) MUSIC CONTEXTUAL MENU–EQUALIZER 2 1 2 While in Music Playback mode (Now Playing screen), press the Navigation ▼ button to open the Music Contextual menu. 2 Scroll to the “Equalizer” option using the Navigation ▲ 1 and/or ▼ 2 buttons. 3 3 1 1 Select a desired “Equalizer” setting (None, Extra Bass, Rock, Jazz, Classical or Pop) using the Navigation ®/Skip/Search n 1 or √/o 2 button, followed by the Enter/ Play/Pause ®p button 3 to confirm.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) MUSIC CONTEXTUAL MENU–PLAY MODE 2 1 2 While in Music Playback mode (Now Playing screen), press the Navigation ▼ button to open the Music Contextual menu.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) MUSIC CONTEXTUAL MENU–COLOR THEME 2 1 2 While in Music Playback mode (Now Playing screen), press the Navigation ▼ button to open the Music Contextual menu. 3 2 1 Scroll to “Color Theme” using the Navigation ▲ 1 and/or ▼ 2 buttons. 1 Select a desired “Color Theme” setting (Blue, Cyan, Green, Gold, Purple, Red or Black) using the Navigation ®/Skip/Search n 1 or √/o 2 button.
OPERATION–VIDEO PLAYBACK MODE TO WATCH VIDEOS This unit supports the following video formats: AVI support (decoder: xvid, size: 128 x 128 resolution, Frame Per Second: 30fps max, Bit Rate: 768 kbps max, Frequency Range: 8-48kHz, Audio Format: 128kbps, 48kHz, Stereo CBR); WMV support (decoder complexity: simple profile, size 128 x 128 resolution, Frame Per Second: 30fps max, Bit Rate: 384 kbps max , Frequency Range: 8-48kHz, Audio Format: 128kbps, 48kHz, Stereo CBR).
OPERATION–VIDEO PLAYBACK MODE (CONTINUED) HIGH-SPEED VIDEO SEARCH 1 2 1 During playback, press and hold the Navigation ®/Skip/Search n 1 or √/o 2 button to move the player forward or backward within a video to locate a specific scene. The player will move forward or backward at high speed as long as the button is held. When you release the button, normal playback will resume.
OPERATION–PHOTO PLAYBACK MODE TO VIEW PHOTOS–This unit supports baseline JPEGs. 1 2 1 2 Turn the unit on and access the main menu as described on page 16. Select Photo using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. 3 2 1 3 2 Use the Navigation ▲ 1 and/or ▼ 2 buttons to select between Slide show, Thumbnails or to select a particular photo. If you have selected a particular photo, press the Enter/Play/Pause ®p button 3 to view it.
OPERATION–PHOTO PLAYBACK MODE (CONTINUED) THUMBNAIL VIEW 2 1 2 1 If you scrolled to Thumbnails in Step 2 on the previous page, press the Enter/Play/Pause ®p button 1; a thumbnail view of the photos will appear in the display. Use the Navigation ▲, ▼, ®/Skip/Search n or √/o 2 buttons to browse the photos. Press the Enter/Play/Pause ®p button to view the desired photo.
SETTINGS MENU SETTING THE COLOR THEME 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. 3 1 2 Press the Enter/Play/Pause ®p button to select “Color Theme”. 4 3 2 Select a desired “Color Theme” setting (Blue, Cyan, Green, Gold, Purple, Red or Black) using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/ Pause ®p button 3 to confirm.
SETTINGS MENU (CONTINUED) SETTING THE EQUALIZER 1 2 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to “Equalizer” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it.
SETTINGS MENU (CONTINUED) SETTING THE PLAY MODE 1 2 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to “Play Mode” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it. 4 3 1 3 2 3 2 Press the MENU/Lock button to go back to the main menu.
SETTINGS MENU (CONTINUED) SETTING THE BRIGHTNESS 1 2 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. 2 Scroll to “Brightness” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it.
SETTINGS MENU (CONTINUED) SETTING THE POWER SAVINGS 1 2 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to “Power Savings” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it.
SETTINGS MENU (CONTINUED) SETTING THE BACKLIGHT TIMER 1 1 2 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. 3 1 Scroll to “Backlight Timer” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it.
SETTINGS MENU (CONTINUED) SETTING THE TIME 1 2 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to “Time Set” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it. 4 3 2 3 2 1 Set the current hour using the Navigation ▲ and/or ▼ 1 buttons. Then, press the Navigation ®/Skip/Search n button 1 to navigate to the minute.
SETTINGS MENU (CONTINUED) SETTING THE LANGUAGE 1 2 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to “Language” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it.
SETTINGS MENU (CONTINUED) TO VIEW THE SYSTEM INFO (“ABOUT”) 2 1 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. 3 2 Scroll to “About” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it. 3 The “About” screen will display the device information such as the Firmware version, Int. (Internal) Total Memory, Int.
SETTINGS MENU (CONTINUED) TO RESTORE THE DEFAULT SETTINGS 2 1 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. 3 3 2 Scroll to “Default” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it. 4 2 1 Press the Enter/Play/Pause ®p button 1 to reset all of the unit’s settings to the factory default settings.
SETTINGS MENU (CONTINUED) TO FORMAT THE PLAYER WARNING! Do not format this player unless it stops working and you are instructed to do so by technical support personnel. 2 1 1 1 2 Turn the unit on and access the main menu as described on page 16. Select Setting using the Navigation ▼ button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to “Format” using the Navigation ▲ 1 and/or ▼ 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. No sound. CAUSE Battery is low/empty. Power is not turned on. Headphones are not inserted. Volume is set too low. The media files are corrupted. No files are in the player. The computer is not recognizing the player. The player is not securely connected. Computer is not compatible. WMA files with DRM can’t playback. Incorrect downloading methods.
TROUBLESHOOTING GUIDE (CONTINUED) SYMPTOM No buttons work. Unit acting erratically. CAUSE The Lock feature is activated. Unit needs to be reset or firmware needs to be updated. Unit needs to be reset or firmware needs to be updated. 41 SOLUTION Deactivate Lock feature as described on page 16. Reset unit and/or update firmware, see page 43. Reset unit and/or update firmware, see page 43.
FORMATTING THE PLAYER Formatting the Player WARNING! Do not format this player unless it stops working and you are instructed to do so by technical support personnel. 1. Use the USB cable to connect the player and the computer. 2. Double click on My Computer, then right click “Media Player” and left click on "Format". 3. For “Media Player”, at the "Format" window, click OK to confirm and the player will start to format (see figure to the right). When finished, click "OK" to close the Format window.
RESETTING THE UNIT If the unit acts erratically, reset the unit by inserting a thin object (such as a paper clip) into the recessed Reset button. For the Reset button, see page 6 for the button's location. FOR FIRMWARE UPGRADE Please visit our Web site at www.memorexelectronics.com to check if there is new firmware available. IMPORTANT NOTE: Before upgrading the firmware, please backup all of your media files on your computer. After upgrading, format the unit to complete the upgrade procedure.
Audio File Support SPECIFICATIONS Frequency Range Headphones Output S/N Ratio MP3 WMA AVI WMV General Picture Dimension Weight USB Built-in Memory Built-in Battery Max. Playtime Supported OS Operating Temperature 20Hz–20KHz 5mW, 32ohm (Max Vol) 90dB (MP3) MPEG 1/2/2.
FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE. FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR IMATION ELECTRONICS PRODUCTS.
TABLA DE CONTENIDO Precauciones. . . . . . . . . . . . . . . . . . . . . . . . . 2 Declaración de la FCC . . . . . . . . . . . . . . . . . 3 Directrices de la EIA . . . . . . . . . . . . . . . . . . . 4 Ubicación de los controles . . . . . . . . . . . . . . 6 Cargar la batería . . . . . . . . . . . . . . . . . . . . . . 7 Descargar y transferir archivos . . . . . . . . . . . 8 Instalacion de MP3 Player Utilities 5.10 . . . 12 Uso de MP3 Player Utilities 5.10 (convertidor de video) . . . . . . . . . . . . .
PRECAUCIONES DERECHO DE AUTOR: • La distribución de copias de pistas con formato MP3, WMA con DRM o WAV sin autorización constituye una violación a las leyes internacionales de derechos de autor. SEGURIDAD: • La vibración experimentada al caminar o hacer ejercicio no afectará al reproductor. Sin embargo, dejar caer el reproductor o dejar caer un objeto pesado sobre el reproductor puede ocasionar daños o distorsión en el sonido. • No permita que caiga líquido sobre el reproductor o en su interior.
DECLARACIÓN DE LA FCC Este aparato cumple con el Apartado 15 de las normas de la FCC. El funcionamiento está sujeto a las siguientes dos condiciones: (1) Este aparato no debe causar interferencia dañina y (2) este aparato debe aceptar cualquier interferencia que reciba, incluso aquella interferencia que pueda causar una operación indeseada.
Estimado Cliente: En el momento en que seleccionó un equipo de tan alta tecnología como el que usted acaba de comprar, su entretenimiento musical recién comenzó. Ahora es tiempo de pensar en cómo puede optimizar el entretenimiento que su equipo le ofrece.
Nivel de decibeles 30 40 50 60 70 80 Ejemplo Una biblioteca, susurros. Sala, refrigerador, dormitorio lejos del tráfico. Semáforo, conversación normal, oficina tranquila. Aire acondicionado a 20 pies, máquina de coser Aspiradora, secadora de pelo, restaurante bullicioso. Tráfico en la calle, triturador de basura, alarma de reloj a 60 cm. LOS SIGUIENTES RUIDOS PUEDEN SER PELIGROSOS SI SE SOMETE A ELLOS EN FORMA CONSTANTE: 90 100 120 140 180 Metro, motocicletas, tráfico de camiones, podadora de césped.
UBICACIÓN DE LOS CONTROLES 1 7 8 2 9 10 11 3 4 5 6 1. Entrada para auriculares 2. 3. 4. Pantalla Botón de navegación π Botón de navegación √/Salto /Búsqueda (Skip/Search) o Botón de navegación † Entrada de USB (CABLE USB. PIEZA 5. 6. 7. 8. 9. 12 13 10. Botón Menú/Bloqueo (MENU/Lock) 11. Botón de encendido/apagado (On/Off) 12. Botón Entrar/Reproducir/Pausar (Enter/Play/Pause) ®p 13. Botón de navegación ®/Salto/ Búsqueda (Skip/Search) n (AURICULARES. PIEZA N.
RECARGAR LA BATERÍA Esta unidad tiene una batería recargable integrada de polímero de litio. Cuando las barras en el indicador de la batería (en la pantalla) bajan (ver Figura 1), y en particular cuando las barras cambian a color rojo, recargue la batería de la siguiente manera. 1. Conecte el cable USB al conector USB en la parte inferior de la unidad y al puerto USB en su computadora (como se muestra); en la pantalla aparecerá “✓ OK to Remove” [Listo para ser quitado].
DESCARGAR Y TRANSFERIR ARCHIVOS SISTEMAS OPERATIVOS COMPATIBLES Esta unidad es compatible con Windows XP (SP2) con Windows Media Player 10 o superior. Consulte las siguientes páginas para saber cómo: transferir archivos de videos, música y fotos, convertir música de un CD de audio a formato MP3 o WMA utilizando Windows Media Player 10, transferir archivos MP3/WMA y WMA con DRM 9 o 10 utilizando Windows Media Player 10. NOTA: Ingrese en www.Microsoft.
DESCARGAR Y TRANSFERIR ARCHIVOS Para Windows XP, puede utilizar el software Reproductor de Windows Media 10 para convertir la música en un CD de audio a formato MP3 o WMA, del siguiente modo: 1. Abra el explorador de Reproductor de Windows Media 10, luego haga clic en el icono de “Copiar desde CD” en la barra de herramientas superior. Introduzca un CD de música en la unidad de disco CD-Rom de su computadora. 2. 3. 4.
DESCARGAR Y TRANSFERIR ARCHIVOS TRANSFERIR ARCHIVOS MP3/WMA/VIDEO/FOTOS Y ARCHIVOS WMA CON DRM 9 O DRM 10 UTILIZANDO WINDOWS MEDIA PLAYER 10 (SÓLO PARA WINDOWS XP) Para transferir archivos MP3/WMA/VIDEO/FOTOS/WMA con DRM 9 o 10 al reproductor, siga los procedimientos descritos a continuación utilizando WMP (Windows Media Player) 10. Antes de comenzar conecte la unidad a la computadora como se indica anteriormente. 1. Abra el explorador de Reproductor de Windows Media 10 y haga clic en “Sincronizar”. 2.
DESCARGAR Y TRANSFERIR ARCHIVOS CREACIÓN DE UNA LISTA DE REPRODUCCIÓN Siga los pasos a continuación para crear una lista de reproducción en el menú Música: 1. Conecte su reproductor al puerto USB de su computadora como se indica en la página 7. 2. Oprima y mantenga presionado el botón Entrar/Reproducir/Pausar (Enter/Play/ Pause) ®p durante tres segundos. 3. En su computadora haga doble clic en “Mi PC”.
INSTALACIÓN DE MP3 PLAYER UTILITIES 5.10 Procedimiento para instalar MP3 Player Utilities 5.10: 1. Introduzca el CD-Rom de instalación en la bandeja para CD, entonces aparecerá la pantalla de instalación. Si no aparece automáticamente la pantalla de instalación, haga doble clic en Mi PC, luego doble clic en unidad de CD y por último doble clic en “Setup.exe”. 2. Aparecerá la pantalla de bienvenida. Haga clic en “Siguiente” (Next). 3. Aparecerá la pantalla “Carpeta de instalación” (Installation Folder).
INSTALACIÓN DE MP3 PLAYER UTILITIES 5.10 4. Aparecerá la pantalla “Información sobre MP3 Player Utilities 5.10”. Lea la información y haga clic en “Siguiente” (Next). 5. Aparecerá la pantalla “Confirmar instalación” (Confirm Installation). Haga clic en “Siguiente” (Next). 6. Una vez que el programa termino de instalarse, aparecerá la pantalla “Instalación completa” (Installation Complete). Haga clic en “Cerrar” (Close) para finalizar la instalación.
USO DE MP3 PLAYER UTILITIES 5.10 (Convertidor de video) Haga clic para agregar archivos para su conversión Haga clic para seleccionar la ubicación del archivo de salida Icono para Configuración En esta ventana, coloque una marca de verificación en la columna “Seleccionar” (Select), al lado de “Nombre de archivo” (File name) de los archivos que desee convertir. Icono para Ayuda Icono para Comenzar Puede utilizar el software MP3 Player Utilities 5.
USO DE MP3 PLAYER UTILITIES 5.10 (Convertidor de video) 4. 5. 6. 7. 8. En la ventana de archivos a convertir, coloque una marca de verificación en la columna “Seleccionar” (Select) al lado de “Nombre de archivo” (File name) de los archivos que desee convertir. Luego, haga clic en el icono “Configuración” (vea la ilustración en la página anterior para conocer la ubicación del icono). Defina las configuraciones de la conversión de acuerdo con lo que desee.
OPERACIÓN GENERAL ENCENDER O APAGAR LA UNIDAD 1 Para encender la unidad, presione y mantenga presionado el botón de encendido/ apagado (Power On/Off); aparecerá la pantalla de Memorex durante unos minutos seguida del menú Principal. Para apagar la unidad, presione y mantenga presionado el botón de encendido/apagado (Power On/Off) hasta que en la pantalla aparezca “Apagando” (Shutting Down).
OPERACIÓN GENERAL (CONTINÚA) BOTONES DE VOLUMEN CONECTOR DE AUDÍFONOS 1 1 Conecte los auriculares (incluidos) en la entrada para Auriculares ubicada en la parte superior de la unidad. 17 Para controlar el volumen, simplemente presione el botón Volumen (Volume) +/durante la reproducción. NOTA: Cuando cambia el volumen, el indicador se superpondrá en la parte inferior de la pantalla existente y desaparecerá de la pantalla tres segundos después si no se presiona ninguno de los botones de volumen.
OPERACIÓN–MODO DE REPRODUCCIÓN DE MÚSICA PARA ESCUCHAR MÚSICA EN MP3 o WMA Esta unidad es compatible con los siguientes formatos de audio: MP3, MPEG 1/2/2.5 Layer 3 con una velocidad en bits de 32-320 kbps, archivos WMA o WMA con DRM 9 ó 10 con una velocidad en bits de 48-192 kbps. 1 2 1 2 Encienda la unidad y acceda el menú principal como se describe en la página 16. Seleccione Música usando el botón de Navegación ▼ 1, seguido del botón de Entrar/Reproducir/Pausa ®p 2.
OPERACIÓN–MODO DE REPRODUCCIÓN DE MÚSICA 3 1 3 2 En cuanto a explorar la música, vea los detalles a continuación: Cola de reproducción: “Reproducir todo”, “Borrar todo”, “Borrar pista” y el nombre de la canción aparecerá en la pantalla. Seleccione Reproducir todo o la canción deseada usando los botones de Navegación ▲ 1 y/o ▼ 2, luego presione el botón de Entrar/Reproducir/Pausa ®p 3 para empezar la reproducción. La unidad reproducirá esa canción y las canciones siguientes.
OPERACIÓN–MODO DE REPRODUCCIÓN DE MÚSICA CÓMO BORRAR CANCIONES DE LA COLA DE REPRODUCCIÓN 1 1 2 3 2 Entre al submenú Cola de reproducción como se describe en la página 18. Para borrar todas las pistas en la cola, use el botón de Navegación ▲ 1 y/o ▼ 2 para seleccionar Borrar todo y luego presione el botón de Entrar/ Reproducir/Pausa ®p 3.
OPERACIÓN–MODO DE REPRODUCCIÓN DE MÚSICA BÚSQUEDA DE MÚSICA A ALTA VELOCIDAD 1 2 1 Durante la reproducción, presione el botón de Navegación ®/Brincar/Buscar n 1 o √/o 2 y manténgalo presionado para mover el reproductor hacia adelante o atrás dentro del archivo para encontrar un pasaje musical específico. Mientras mantenga el botón presione, el reproductor avanzará o retrocederá a alta velocidad. Cuando suelte el botón, se reanudará la reproducción normal.
OPERACIÓN–MODO DE REPRODUCCIÓN DE MÚSICA MENÚ CONTEXTUAL DE MÚSICA–ECUALIZADOR 2 1 2 Desplácese a la opción “Ecualizador” usando los botones de Navegación ▲ 1 y/o ▼ 2. Mientras está en modo de reproducción de música (pantalla de Reproduciendo ahora), presione el botón de Navegación ▼ para abrir el menú contextual de Música.
OPERACIÓN–MODO DE REPRODUCCIÓN DE MÚSICA MENÚ CONTEXTUAL DE MÚSICA–MODO DE REPRODUCIR 2 1 2 1 Desplácese a “Modo de reproducir” usando los botones de Navegación ▲ 1 y/o ▼ 2. 3 NOTAS: • Cuando se configura una opción en el menú Contextual de música, si se presiona el botón Menú/Bloqueo (Menu/Lock) o pasan tres segundos sin actividad, se cierra el menú Contextual de música. • La configuración del “Modo de reproducción” (Play Mode) también configurará el modo de la reproducción de video.
OPERACIÓN–MODO DE REPRODUCCIÓN DE MÚSICA MENÚ CONTEXTUAL DE MÚSICA–TEMA DE COLOR 2 1 2 Mientras está en modo de reproducción de música (pantalla de Reproduciendo ahora), presione el botón de Navegación ▼ para abrir el menú contextual de Música. 1 Desplácese a “Tema de color” usando los botones de Navegación ▲ 1 y/o ▼ 2.
OPERACIÓN–MODO DE REPRODUCCIÓN DE VIDEO PARA VER VIDEOS Compatibilidades: AVI (decodificador: xvid, tamaño: 128 x 128 de resolución, fotogramas por seg.: 30 máx., tasa de transf.: 768 kbps máx, margen de frecuencia: 8-48kHz, formato de audio: 128kbps, 48kHz, tasa de bits constante, estéreo); compatible con WMV (complejidad del decodificador: perfil simple, tamaño 128 x 128 de resolución, fotogramas por seg.: 30fps máx, tasa de transf.
OPERACIÓN–MODO DE REPRODUCCIÓN DE VIDEO BÚSQUEDA DE VIDEO A ALTA VELOCIDAD 1 2 1 Durante la reproducción, presione el botón de Navegación ®/Brincar/Buscar n 1 o √/o 2 y manténgalo presionado para mover el reproductor hacia adelante o atrás dentro del video para encontrar una escena específica. Mientras mantenga el botón presione, el reproductor avanzará o retrocederá a alta velocidad. Cuando suelte el botón, se reanudará la reproducción normal.
OPERACIÓN–MODO DE REPRODUCCIÓN DE FOTO PARA VER FOTOGRAFÍAS–Esta unidad es compatible con el formato baseline JPEG. 2 1 1 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la foto utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/Pausar (Enter/Play/ Pause) ®p 2.
OPERACIÓN–MODO DE REPRODUCCIÓN DE FOTO VISTA EN MINIATURA 2 1 2 1 Presione el botón Entrar/Reproducir/Pausar (Enter/Play/Pause) ®p para ver la foto que desea. Si se deslizó hasta Vista en miniatura (Thumbnails)en el paso 2 en la página anterior, presione el botón Entrar/Reproducir/Pausar (Enter/Play/Pause) ®p 1; aparecerá una vista en miniatura de las fotos en la pantalla. Utilice los botones de Navegación ▲, ▼, ®/Salto/Búsqueda (Skip/Search) n o √/o 2 para navegar por las fotos.
MENÚ DE CONFIGURACIONES CONFIGURACIÓN DEL TEMA DE COLOR 2 1 1 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de navegación ▼ 1, seguido por el botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 2. Presione el botón Entrar/Reproducir/Pausar (Enter/Play/Pause) ®p para seleccionar “Tema de color” (Color Theme).
MENÚ DE CONFIGURACIONES (CONTINÚA) CONFIGURACIÓN DEL ECUALIZADOR 1 2 1 1 2 3 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/Pausar (Enter/ Play/Pause) ®p 2. Deslícese hasta “Ecualizador” (Equalizer) utilizando los botones de Navegación ▲ 1 y ▼ 2, seguidos del botón Entrar/ Reproducir/Pausar (Enter/Play/Pause) ®p 3 para seleccionarlo.
MENÚ DE CONFIGURACIONES (CONTINÚA) CONFIGURACIÓN DEL MODO DE REPRODUCCIÓN 2 1 1 1 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/Pausar (Enter/Play /Pause) ®p 2. 3 2 Deslícese hasta “Modo de reproducción” (Play Mode) utilizando los botones de Navegación ▲ 1 y ▼ 2, seguidos del botón Entrar/Reproducir/Pausar (Enter/ Play/Pause) ®p 3 para seleccionarlo.
MENÚ DE CONFIGURACIONES (CONTINÚA) CONFIGURACIÓN DEL BRILLO 2 1 1 1 2 3 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 2. Deslícese hasta “Brillo” (Brightness) utilizando los botones de Navegación ▲ 1 y ▼ 2, seguidos del botón Entrar/Reproducir/Pausar (Enter/Play/ Pause) ®p 3 para seleccionarlo.
MENÚ DE CONFIGURACIONES (CONTINÚA) CONFIGURACIÓN DE LA FUNCIÓN DE AHORRO DE ENERGÍA 2 1 1 1 2 3 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 2.
MENÚ DE CONFIGURACIONES (CONTINÚA) CONFIGURACIÓN DEL TEMPORIZADOR DE LA LUZ DE FONDO 1 2 1 1 2 Deslícese hasta “Temporizador de la luz de fondo” (Backlight Timer) utilizando los botones de Navegación ▲ 1 y ▼ 2, seguidos del botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 3 para seleccionarlo. Encienda la unidad y entre al menú principal como se describe en la página 16.
MENÚ DE CONFIGURACIONES (CONTINÚA) CONFIGURACIÓN DE LA HORA 2 1 1 1 2 3 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 2. Deslícese hasta “Configuración de la hora” (Time Set) utilizando los botones de Navegación ▲ 1 y ▼ 2, seguidos del botón Entrar/Reproducir/Pausar (Enter/Play/Pause) ®p 3 para seleccionarlo.
MENÚ DE CONFIGURACIONES (CONTINÚA) CONFIGURACIÓN DE IDIOMA 2 1 1 1 2 3 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 2. Deslícese hasta “Idioma” (Language) utilizando los botones de Navegación ▲ 1 y ▼ 2, seguidos del botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 3 para seleccionarlo.
MENÚ DE CONFIGURACIONES (CONTINÚA) PARA VER LA INFORMACIÓN DEL SISTEMA (“ACERCA DE” [ABOUT]) 2 1 1 1 2 3 2 Deslícese hasta “Acerca de” (About) utilizando los botones de Navegación ▲ 1 y ▼ 2, seguidos del botón Entrar/ Reproducir/Pausar (Enter/Play/Pause) ®p 3 para seleccionarlo. Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 2.
MENÚ DE CONFIGURACIONES (CONTINÚA) RESTABLECER LA CONFIGURACIÓN PREDETERMINADA 2 1 1 1 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 2. 3 2 Deslícese hasta “Predeterminado” (Default) utilizando los botones de Navegación ▲ 1 y ▼ 2, seguidos del botón Entrar/ Reproducir/Pausar (Enter/Play/Pause) ®p 3 para seleccionarlo.
MENÚ DE CONFIGURACIONES (CONTINÚA) FORMATEAR EL REPRODUCTOR ADVERTENCIA: No formatee este reproductor a menos que deje de funcionar y personal de soporte técnico le aconseje hacerlo. 2 1 1 1 2 Encienda la unidad y entre al menú principal como se describe en la página 16. Seleccione la configuración utilizando el botón de Navegación ▼ 1, seguido por el botón Entrar/Reproducir/ Pausar (Enter/Play/Pause) ®p 2.
GUÍA DE DIAGNÓSTICO Si tiene problemas con esta unidad, revise la tabla a continuación antes de llamar a servicio. SÍNTOMA CAUSA La unidad no enciende. La batería está baja/ descargada. La unidad no está encendida. Sin sonido. Los audífonos no están conectados. El volumen está muy bajo. Los archivos de media están corruptos. No hay archivos en el reproductor. SOLUCIÓN Recargue la batería como se describe en la pág. 7. Vea la pág. 16 en cuanto a cómo encenderla. Inserte los audífonos.
GUÍA DE DIAGNÓSTICO (CONTINÚA) SÍNTOMA No funcionan los botones. La unidad actúa erráticamente. CAUSA La función de Bloqueo está activada. Debe reiniciar la unidad o necesita actualizar el firmware. Debe reiniciar la unidad o necesita actualizar el firmware. 41 SOLUCIÓN Desactive la función de Bloqueo como describe la pág. 16. Reinicie la unidad y/o actualice el firmware, ver página 43. Reinicie la unidad y/o actualice el firmware, ver página 43.
FORMATEAR EL REPRODUCTOR Formatear el reproductor ¡ADVERTENCIA! No formatee el reproductor a menos que deje de funcionar y se lo indique el personal de soporte técnico. 1. Use el cable USB para conectar el reproductor y la computadora. 2. Haga doble clic en Mi PC, luego haga clic con el botón derecho del mouse en “Media Player” y clic con el botón Ventana para formatear en “Media Player” izquierdo en “Formatear” (Format). 3. Para “Media Player”, en la ventana "Formatear", haga clic en OK para confirmar.
REINICIAR LA UNIDAD Si la unidad actúa erráticamente, reinicie la unidad insertando un pequeño objeto (como un clip para papel) en el botón de Reinicio. Con respecto al botón de Reinicio, vea la página 6 en cuanto a la ubicación. ACTUALIZAR EL SOFTWARE DEL FABRICANTE Visite nuestro sitio web en www.memorexelectronics.com para revisar si existe una versión más nueva del firmware. NOTA IMPORTANTE: Antes de actualizar el firmware, respalde todos sus archivos en su computadora.
ESPECIFICACIONES Audio Soporte de archivos Rango de frecuencia Salida de audífonos Relación S/N MP3 WMA AVI WMV Imagen General Dimensión Peso USB Memoria integrada Batería integrada Tiempo máx. de reproducción OS compatible Temperatura de operación de 20Hz a 20KHz 5mW, 32 ohmios (vol. máx.) 90db (MP3) MPEG 1/2/2.
PARA OBTENER LA ACTUALIZACIÓN DEL FIRMWARE, VISITE NUESTRO SITIO WEB EN WWW.MEMOREXELECTRONICS.COM PARA REVISAR SI HAY UN FIRMWARE NUEVO DISPONIBLE. PARA OBTENER AYUDA ADICIONAL CON RESPECTO A LOS AJUSTES O LA OPERACIÓN, VISITE NUESTRO SITIO WEB EN: WWW.MEMOREXELECTRONICS.COM O COMUNÍQUESE CON SERVICIO AL CLIENTE AL 1-800-919-3647. CONSERVE EL EMPAQUE AL MENOS DURANTE 90 DÍAS POR SI ACASO NECESITARA REGRESAR EL PRODUCTO A SU DISTRIBUIDOR O IMATION ELECTRONICS PRODUCTS.