MMP8570 User’s Guide Personal FM Stereo MP3/WMA Player Before operating this product, please read these instructions completely.
PRECAUTIONS COPYRIGHT: • Distributing copies of MP3, WMA, WMA with DRM tracks without permission is a violation of international copyright laws. SAFETY: • • • Vibration experienced during walking or exercising will not affect the player. However, dropping the player or dropping a heavy object on the player may result in damage or sound distortion. Avoid spilling any liquid onto or into the player.
FCC DECLARATION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Decibel Level 30 40 50 60 70 80 Example Quiet library, soft whispers Living room, refrigerator, bedroom away from traffic Light traffic, normal conversation, quiet office Air conditioner at 20 feet, sewing machine Vacuum cleaner, hair dryer, noisy restaurant Average city traffic, garbage disposals, alarm clock at two feet THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE: 90 100 120 140 180 Subway, motorcycle, truck traffic, lawn mower Garbage truck, chain saw, pneumatic drill Rock band conce
LOCATION OF CONTROLS 1 2 8 9 3 10 4 5 6 11 12 13 7 14 1. 2. 3. 4. 5. 6. Menu/Lock Button VOLUME +/– Buttons Display PRESS TO OPEN Button PLAY/PAUSE ®p Button Navigation √/Skip/Search m Button 7. Headphone Jack 8. Power/Stop Button 9. Navigation Control 10. Battery Compartment (Rear of Unit) 11. Tuning/Navigation Up ▲ Button 12. Navigation ®/Skip/Search l Button 13. Tuning/Navigation Down ▼ Button 14.
BATTERY INSTALLATION Batt. When the bars in the battery indicator (in the display) become Full low (see figure 1), replace the battery as follows. Batt. 1. Open the rear cover by pressing the PRESS TO OPEN Low button, then lift the rear cover up to remove it as shown in Figure 1 figure 2. 2. Insert one (1) “AAA” battery as shown in figure 3. An alkaline battery is recommended for the longest playing time. 3. Put the rear cover back on until it snaps in place.
INSTALL “DIGITAL AUDIO PLAYER” SOFTWARE TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE For Windows ME, Windows2000 or Windows XP: Windows will automatically detect the audio player without installing the CD software when the USB cable is connected. For Macintosh OSX: Macintosh OSX will automatically detect the audio player without installing the CD software. Do not install the software when using a Macintosh.
WINDOWS 98 DRIVER INSTALLATION 2. Click “MMP8570” to run the Windows 98SE driver. 3. Follow the on-screen instructions to install the software.
WINDOWS 98 DRIVER INSTALLATION (CONTINUED) 4. Install the software under the directory as prompted. Warning: DO NOT change the installation path. Otherwise, the driver may not run properly.
WINDOWS 98 DRIVER INSTALLATION (CONTINUED) 5. After successfully installing the driver software, click "Finish" to finish the installation and exit the Setup menu. 6. When the installation has completed, the new program, “Memorex Chrono Digital Audio Player”, will be added to the PROGRAM menu on your computer.
DOWNLOADING AND TRANSFERRING FILES TRANSFERRING FILES You can download digital music files from the Internet or use encoding software to convert music that you have on an audio CD into MP3 or WMA format. Once these files are stored on your computer you can easily copy them to your player. Connect the computer to your player using the supplied USB cable. Press the Power/Stop button to turn the unit on. A "Removable Disk" window will automatically pop up on your computer screen.
SAFELY REMOVE HARDWARE SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER NOTE: To avoid damage to your player or data loss, always follow the procedure listed below before disconnecting the USB cable from your computer or disconnecting the player from the USB cable. Using your mouse, double click the "Safely Remove Hardware" icon on the task bar. From the "Safely Remove Hardware" window, select "USB Mass Storage Device" and click the "Stop" button.
INSTALLING MUSICMATCH JUKEBOX NOTE: WMA DRM protected files will not play if you use the ‘drag and drop’ procedure. You must follow the procedure below to play WMA DRM files on your MMP8570. 1. Install the MMJB Software as described above. 2. Turn the unit ON, then connect the USB cable to the unit and the USB port of the computer. “Transfer Mode” will be displayed on the LCD when it is properly connected. 5. The tracks are now properly transferred to the player.
INSTALLING MUSICMATCH JUKEBOX (CONTINUED) 14
DOWNLOADING AND TRANSFERRING FILES (CONTINUED) EXTERNAL MEMORY CARD TO AVOID DAMAGE, make sure the unit is off before inserting or removing the card. 1. 2. 3. Remove the rear cover by pressing the PRESS TO OPEN button, then lift the rear cover up to remove it as shown in Figure 1. Insert a SD/MMC memory card (not included) up to 512MB, facing up as shown in Figure 2. Connect the USB cable as described previously. The unit will turn on automatically.
OPERATION LOCK SWITCH TURNING THE POWER ON/OFF 1 1 Turn the unit on by pressing the Power/Stop button; the Memorex start screen will appear in the display temporarily. Then the Music Player menu will appear and the MP3/WMA track’s information will appear in the display. To turn the unit off, press and hold the Power/Stop button; “Hold Down To Power Off” will appear in the display. The unit will turn off after it counts up from one to three. Do not release the Power/Stop button until the unit1turns off.
OPERATION (CONTINUED) TO LISTEN TO THE FM RADIO 1 2 Turn the unit on by pressing the Power/Stop button; the Memorex start screen will appear in the display temporarily. Then the Music Player menu will appear and the MP3/WMA track’s information will appear in the display. Press the Menu/Lock button 1; the Menu will appear. Rotate the Navigation control to select FM Tuner, then press the Navigation control 2; the FM Tuner will appear. 3 1 2 4 11 Select a station by rotating the Navigation control.
OPERATION (CONTINUED) TO MANUALLY SET A STATION INTO MEMORY 1 2 3 1 2 Follow the steps on the previous page to turn on the unit and enter the FM Tuner mode. Select the desired channel number to set using the Navigation/Skip/Search √/m 1 or ®/l 2 button. Tune a station using the Navigation control 3. NOTE: See note on Navigation at the bottom of page 16.
OPERATION (CONTINUED) TO LISTEN TO MP3s/WMAs 1 2 1 1 2 3 2 Turn the unit on by pressing the Power/Stop button ❶; the Memorex start screen will appear in the display temporarily. Then the Music Player menu will appear and the MP3/WMA track’s information will appear in the display. Press the PLAY/PAUSE ®p button 2 to start playback; the MP3/WMA information will scroll across the display and the song number and timer will appear at the top of the display. 3 Set the Equalizer as shown on page 16.
OPERATION (CONTINUED) TO PAUSE PLAYBACK 1 2 During playback, if you wish to pause the file momentarily, press the PLAY/PAUSE ®p button; playback will pause, the Pause indicator will appear and the timer will stop counting. Press the PLAY/PAUSE ®p button again to resume playback; the sound will return, the Play indicator will appear and the timer will start counting again. NOTE: If you are not in the Music Player menu, the Pause function will not be available.
OPERATION (CONTINUED) FORWARD/REVERSE SKIP 1 2 During playback, press the Navigation/Skip/Search ®/l button to advance the player to the beginning of the next file. Press the Navigation/Skip/Search ®/l button repeatedly to advance the player to higher-numbered files. During playback, press the Navigation/Skip/Search √/m button to move the player back to the beginning of the currently playing file. Press the Navigation/Skip/Search √/m button repeatedly to move the player back to lower-numbered files.
OPERATION (CONTINUED) TO SELECT A PLAY MODE 1 1 2 2 Rotate the Navigation control to select Play mode, then press the Navigation control; the Play Mode menu will appear. Press the Menu/Lock button 1. Rotate the Navigation control 2 to select Settings, then press the Navigation control 2; the Settings menu will appear.
OPERATION (CONTINUED) TO SET THE CONTRAST 1 1 2 2 1 Press the Menu/Lock button 1. Rotate the Navigation control 2 to select Settings, then press the Navigation control 2; the Settings menu will appear. Rotate the Navigation control 2 to select Contrast, then press the Navigation control; the Contrast setting will appear. Rotate the Navigation control to set the contrast, then press the Navigation control; the Settings menu will appear. 1 2 TO SET THE BACKLIGHT 1 2 Press the Menu/Lock button 1.
OPERATION (CONTINUED) TO SET THE POWER SAVINGS 1 1 2 2 1 Rotate the Navigation control to select Disable, 1 minute, 3 minutes, 5 minutes or 10 minutes. This is the time the unit will stay on if it is not in Play mode and no buttons have been pressed for the set time. Press the Navigation control to set; the Settings menu will appear. Press the Menu/Lock button 1. Rotate the Navigation control 2 to select Settings, then press the Navigation control 2; the Settings menu will appear.
OPERATION (CONTINUED) TO SET THE LANGUAGE 1 1 2 2 Rotate the Navigation control to select English, Traditional Chinese, French, Spanish, Dutch or Italian. Press the Navigation control to set; Press the Menu/Lock button 1. Rotate the Navigation control 2 to select Settings, then press the Navigation control 2; the Settings menu will appear. Rotate the Navigation control 2 to select Language, then press the Navigation control 2; the Language menu will appear. the Settings menu will appear.
SPECIFICATIONS 2 1 DELETING A FILE 1 2 2 2 When the selected MP3/WMA file's information appears in the display, press the Menu/Lock button 1; the Main Menu will appear. Rotate the Navigation control to select Delete File 2, then press the Navigation control 2; the delete file menu will appear in the display. While in the Music Player Menu, press the Navigation/Skip/Search √/m 1 or ®/l 2 button to select the file that you wish to delete.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not turn on. Dead battery, or not installed properly. Replace battery and install properly. No sound. Headphones are not inserted. Volume is set too low. DRM files copied & pasted. The MP3 or WMA files are corrupted. Station not tuned. Insert headphones. FM distorted. Download Failure. The computer is not recognizing the player. Raise the volume.
TROUBLESHOOTING GUIDE (CONTINUED) SYMPTOM No buttons work. Unit acting erratically. WMA files with DRM cannot playback. CAUSE The Lock feature is activated. Unit needs to be reset or firmware needs to be updated. Unit needs to be reset or firmware needs to be updated. Incorrect downloading methods. 28 SOLUTION Deactivate Lock feature as described on page 16. Reset unit and/or update firmware, see pages 29-30. Reset unit and/or update firmware, see pages 29-30.
FORMATTING THE PLAYER WARNING! Do not format this player unless it stops working and you are instructed to do so by technical support personnel. Formatting the Player 1. Use the USB cable to connect the player and the computer. 2. Double click on My Computer, right click the "Removable Disk" and left click on "Format". 3. At the "Format" window, select "FAT32" from the file system pull down menu, then click start to format the unit (see figure to the right).
UPDATING THE FIRMWARE WARNING! Do not update the firmware unless you are experiencing problems with your digital audio device. Incorrect or faulty firmware installation will cause the player to stop functioning. 1. Download the updated firmware at www.memorexelectronics.com. 2. Unzip the file, then double click setup.exe in the Desktop folder to install the software to your computer. 3. Connect the player to the computer using the supplied USB cable and the installation screen will appear.
SPECIFICATIONS Audio Frequency Range Headphones Output S/N Ratio 20Hz – 20KHz 10mW, 16ohm (Max. Vol) 90dB (MP3) File Support MP3 WMA Bit Rate Tag Info MPEG 1/2/2.5 Layer 3 Windows Media Audio (WMA file with DRM) 8kbps – 320kbps ID3 Tag (Unicode OS) FM Tuner FM Frequency Range Antenna 87.5MHz – 107.
FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE. FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT (954) 660-7100. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR TO MEMOREX. FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
Memcorp, Inc. Weston, FL Printed in China Visit our website at www.memorexelectronics.
