MPD8802 User’s Guide Personal Compact Disc MP3 Player Before operating this product, please read these instructions completely.
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY PRECAUTIONS (CONTINUED) INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
LOCATION OF CONTROLS 1 2 MAIN UNIT 10 11 12 13 1. 2. 3. 4. 5. 6. 7. 3 4 5 6 7 14 15 10. 11. 12. 13. 14. 15. 16. Skip (o) Button Skip (n) Button PROG. Button Display ESP/ALBUM Button MODE Button DC 4.5V Jack (Rear of Unit) – + 8. PLAY/PAUSE (®p)/POWER ON Button 9.
POWER SOURCES This CD player requires either two (2) “AA” cell standard batteries (not included) or an AC adapter (not included). BATTERY INSTALLATION “ ” will light in the display when batteries are – low (when using battery power). 1. Open the battery compartment door on the bottom of the unit by sliding it out and then lifting it. To prevent the possibility of losing the cover, it cannot be removed. + 2.
CD OPERATION BASS BOOST TURNING POWER ON/OFF 1 2 1 1 To emphasize the bass, slide the DBBS switch to the ON position. For normal bass, slide the DBBS switch to the OFF position. Press the PLAY/PAUSE (®p)/POWER ON button 1 to turn the unit on. To turn the unit off, press the STOP (■)/POWER OFF button ❷. The unit will automatically shut off if stopped (CD Standby) for one minute.
CD OPERATION (CONTINUED) TO INSERT AND PLAY A CD This CD player is designed to play all kinds of Audio Discs and MP3 CD Roms, such as CD recordables and rewritables. Do not try to play CDI, CDV, DVD or computer CDs in this unit. 1 2 1 2 Press the PLAY/PAUSE (®p)/POWER ON button 1 to turn the unit on. Open the CD compartment lid by sliding the CD Door OPEN switch 2. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid.
CD OPERATION (CONTINUED) CD PLAYBACK NOTES: • See page 15 for more information on MP3’s. • When recording (“burning”) CDs, make sure the session is “finalized”, or simply record (“burn”) only one session. You can find more information in your recorder’s manual. • This unit is capable of playing standard CDs or 3” singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, “no disc” will appear in the display.
CD OPERATION (CONTINUED) TO BEGIN PLAYBACK FROM A SPECIFIC TRACK 1 2 2 1 When the desired track number (and file number if using MP3) appears in the display, press the PLAY/PAUSE (®p)/POWER ON button. Playback will begin with the track (or file) you selected. After you insert the disc into the CD player and the total number of tracks appear in the display, you may press either the Skip o 1 or n 2 button to select a specific track for playback.
CD OPERATION (CONTINUED) HIGH-SPEED MUSIC SEARCH 1 2 During playback, depress and hold either the Skip o 1 or n 2 button to move the player forward or backward within a track to locate a specific musical passage. The player will move forward or backward at high speed as long as the buttons are depressed. When you release the Skip o 1 or n 2 button, normal playback will resume.
CD OPERATION (CONTINUED) REPEAT PLAYBACK OF ALL TRACKS 2 1 1 2 To repeat all the tracks on the CD, press the MODE button twice (three times if using an MP3 CD); the Repeat All indicator will appear in the display. (Repeat All and Album indicators wiill appear in the display if using an MP3 CD.) Press the PLAY/PAUSE (®p)/POWER ON button 1 to begin playback. All tracks on the disc will be repeated continuously.
CD OPERATION (CONTINUED) INTRO PLAYBACK (Will play the first 10 seconds of each track) 2 1 1 2 While in the Stop mode, press the MODE button three times (four times if an MP3 CD with multiple directories is inserted); “INTRO” will appear in the display. Press the PLAY/PAUSE (®p)/POWER ON button 1 to begin Intro playback. The first 10 seconds of all tracks on the disc will be played in sequence. To cancel Intro playback, press the MODE button 2 repeatedly until the Mode indicator disappears.
CD OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 64 TRACKS) Programming is the ability to preselect the order in which a series of tracks will be played. 1 2 While in the Stop mode, press the PROG. button. The track number will blink and “P-01” will appear in the display. Select a track to be programmed using the Skip o 1 or n 2 button. If using a MP3 disc, see note below. 3 4 Press the PROG. button to memorize the track.
CD OPERATION (CONTINUED) NOTES ON PROGRAM PLAYBACK • You can review the program by pressing the PROG. button repeatedly while in the Stop mode. • To add a track to the program memory, simply press the PROG. button repeatedly until the track (directory for MP3) appears and “00” blinks in the display. Then follow steps 2 and 3 on the previous page. • Press the STOP (■)/POWER OFF button to stop the program before it is finished (the program memory will be kept). • To clear the memory, press the PROG.
CD OPERATION (CONTINUED) MP3 FAQs–Frequently Asked Questions Please read before playing an MP3 CD. Does the unit support packet write CD-RW? Yes, it can. You can add or delete MP3 files without reformatting. It appears like a PC hard drive. Can the unit read regular music CDs? Yes, it can. However you can not mix MP3s and WAV files on the same CD. If you do this your Portable MP3 CD Player will play only the MP3 files.
CD OPERATION (CONTINUED) ALBUM SKIP 1 When playing an MP3 disc with more than one album, press the ESP/ALBUM button to skip to the next album.
CD OPERATION (CONTINUED) SINGLE SESSION The chart below is an example of a Windows Explorer display that will appear on your computer monitor for a single session MP3 CD Rom with directories/albums. Check the added notes to help you understand the MP3 CD unit display and the playback sequence of directories/albums and tracks on a single session MP3 CD. MULTI SESSION The computer user does not need to finalize the CDR disc as music is burned on the CD.
CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. If necessary, use a CD cleaning kit.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. Disc will not play. Erratic CD playback. No sound from headphones. ESP not working. CAUSE Dead batteries, or not installed properly. Weak or dead Rechargeable batteries. AC adapter not connected. CD compartment not closed. Disc inserted incorrectly. Dirty or defective disc. Moisture condensation on disc. Dirty or defective disc.
SPECIFICATIONS Power Requirement DC ............................2 x AA (LR6) Alkaline batteries Power requirement AC ....................DC IN 4.5V Adapter (center positive) Output Level (Line Out) ............................................0.6VMS (47K Ohms) Output Level (Headphones) ..........................................16mW (32 Ohms) MPEG Rate ............................................................................32-384Kbps Sampling Frequency ..................................8/11.
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.
