Service manual

Engine Engine Electrical 6-23
2006 LSSV Service Manual Supplement
Repair Instructions
Battery and Battery Tray Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Cautions
and Notices.
1. Disconnect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
2. Remove the battery tray support bracket bolt (3).
3. Loosen the bolts (1). Push up the battery tray (2) and
remove from frame.
4. Unsnap the positive battery cable cover.
5. Remove the positive battery cable.
6. Remove the retainer bolt and remove battery.
Installation Procedure
1. Install the battery in tray.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the battery retainer and tighten bolt.
Tighten
Tighten retainer bolt to 25 N•m (18 lb ft).
3. Install the positive cable and tighten.
Tighten
Tighten cable to 17 N•m (13 lb ft).
4. Snap the positive battery cable cover closed.
5. Lift the battery tray (2) onto the bolts (1) on the frame and
tighten.
6. Install the battery tray support bracket bolt (3) and
tighten.
7. Connect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
Relay Replacement – 24V Generator
Removal Procedure
1. Release the clip (2) securing the wiring harness to the
underhood electrical center housing.
2. Remove the 24V relay (1) from the underhood electrical
center housing.