Service manual

Engine Engine Electrical 6-25
2006 LSSV Service Manual Supplement
24V Generator Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Cautions
and Notices.
1. Disconnect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
2. Remove the drive belt. Refer to Drive Belt Replacement
in Engine Mechanical – 6.6L in the 2006 C/K Truck
Service Manual.
3. Disconnect the generator electrical connector.
4. Remove the cable from the output stud.
5. Remove the generator bolts.
6. Remove the generator from the vehicle.
Installation Procedure
1. Install the cable onto the output stud of the generator.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the nut onto the output stud.
Tighten
Tighten output stud to 9 N•m (80 lb in).