Service manual

Engine Engine Electrical 6-27
2006 LSSV Service Manual Supplement
Installation Procedure
Important: Clean any existing corrosion from the battery
terminal bolt flange and the battery cable end.
1. Install the positive cable to the 24V battery.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the battery ground negative cable to the 24V
battery.
Tighten
Tighten the bolt to 17 N•m (13 lb ft).
3. Install the negative battery cable to the right underhood
battery.
Tighten
Tighten the bolt to 17 N•m (13 lb ft).
4. Install the negative cable of the frame mounted battery.
Tighten
Tighten the bolt to 17 N•m (13 lb ft).
Vehicle Load Disconnect Switch
Replacement (LSSV)
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Cautions
and Notices.
1. Disconnect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
2. Remove the disconnect switch key (1) from the switch (2)
(if removable).