Service manual

6-28 Engine Electrical Engine

2006 LSSV Service Manual Supplement

3. Remove the switch mounting nuts and bolts (1).

4. Remove the cable cover mounting screws (2).

5. Remove the switch cable cover (3).

6. Remove the nuts holding the 24V and 12V cables to the

switch and remove the cables.

Note location of cables removed for assembly.

Installation Procedure

Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the 24V and 12V cables to the switch and install

the cable mounting nuts.

Tighten

Tighten the cable mounting nuts to 9 N•m (80 lb in).

• Red cable from 24V battery positive (1) to terminal

• Red/black cable (4) from 24V generator to terminal

• Red cable (3) from UBEC to terminal 1.

• Red cable (2) from 24V battery negative to terminal

2. Install the switch cable cover (3).

3. Install the switch cable cover mounting screws (2).

Tighten

Tighten the switch cable cover mounting screws to 1.6

N•m (14 lb in).

4. Install the switch to the mounting bracket and install the

mounting nuts and bolts (1).

Tighten

Tighten the switch mounting nuts to 9 N•m (80 lb in).