Service manual

Engine Engine Electrical 6-29
2006 LSSV Service Manual Supplement
5. Install the switch key (1) (if removable) to the switch (2).
6. Connect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
12V Battery Positive Cable Replacement –
Battery to Battery
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Cautions
and Notices.
1. Disconnect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
2. Remove the positive battery cable bolt (3), cable to
starter connection and spacer from the right rear
underhood battery.
3. Unsnap the positive battery cable cap from the frame
mounted battery.
4. Remove the positive battery cable bolt.
5. Remove wiring harness straps and remove the positive
battery cable (4) from the vehicle.
Installation Procedure
Important: Ensure that all battery terminal connections are
clean.
1. Install the positive battery cable (4) and secure with
wiring harness straps. Route in the same location as
removed.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the positive battery cable bolt to the frame
mounted battery.
Tighten
Tighten the bolt to 17 N•m (13 lb ft).
3. Snap the positive battery cable cap closed.
4. Install the positive battery cable bolt (3), cable to the
starter connection and spacer.