Service manual

6-30 Engine Electrical Engine
2006 LSSV Service Manual Supplement
5. Install the positive battery bolt cable bolt through the
cable and into the positive battery terminal of the right
rear underhood battery.
Tighten
Tighten the bolt to 17 N•m (13 lb ft).
6. Connect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
12V Battery Negative Cable Replacement –
Frame Mounted Battery
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Cautions
and Notices.
1. Disconnect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
2. Remove the negative battery cable to frame bolt (8).
3. Remove the negative battery cable (10) from the vehicle.
Installation Procedure
Important: Ensure that all battery terminal connections are
clean.
1. Clean the area around the battery cable to frame bolt.
2. Install the battery cable to frame bolt (8) through the
negative battery cable (10).
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install a new star washer (9) and tighten bolt into the
frame.
Tighten
Tighten the bolt to 25 N•m (18 lb ft).
4. Connect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.