Service manual

6-38 Engine Electrical Engine
2006 LSSV Service Manual Supplement
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the cables to the proper locations for the MEGA
Fuse 175 Amp (1) or the MIDI Fuse 50 Amp (2).
3. Install the cable retaining nuts holding the cables to the
fuse.
Tighten
• Tighten MEGA Fuse 175 Amp retaining nuts to 12
N•m (110 lb in).
• Tighten MIDI Fuse 50 Amp retaining nuts to 4 N•m
(35 lb in).
Notice: MEGA Fuse 175 Amp cover shown, MIDI Fuse 50 Amp
cover is same install.
4. Install the fuse cover (1).
5. Connect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure.
24 Volt Battery Hold Down Replacement
Removal Procedure
1. Remove the bolts (1) securing the hold down bracket
onto the battery.
2. Carefully remove the bracket (2) to avoid contact with the
battery terminals.