Service manual

8-10 Body Rear End Body and Accessories
2006 LSSV Service Manual Supplement
3. Remove the 4 bolts and nuts holding the 2 rail adapter
plates to the side rail.
4. Remove the 2 bolts and nuts holding the bow hinge
bracket.
5. Remove the side rail and adapter rail.
6. Remove the bow hinge bracket.
7. Remove the side rail.
8. Remove the side rail adapter.
9. Drill out the 4 existing rivnuts (if damaged) from the box
rail.
Installation Procedure
1. Apply 2 sided foam tape to the underside of the rails and
to the edges of the mounting holes.
2. Install rivnuts to the existing holes (if damaged) using a
rivnut installer.