Service manual

Body and Accessories Frame and Underbody 8-35
2006 LSSV Service Manual Supplement
Repair Instructions
Front Pull Winch Receiver Replacement
Removal Procedure
1. Remove the center bumper. Refer to Center Front
Bumper Replacement in Bumpers.
2. Remove the bolts (1) and remove the receiver by lifting
up.
Installation Procedure
1. Install the receiver into the brackets by pushing down.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the receiver bolts (1).
Tighten
Tighten receiver bolts to 88-98 N•m (65-72 lb ft).
3. Install the center front bumper. Refer to Center Front
Bumper Replacement in Bumpers.
Front D-Ring Replacement (LSSV)
Removal Procedure
1. Remove the nut and bolt (2).
2. Remove the D-ring from the mount.
3. Discard the wave washer (1).