Service manual

8-36 Frame and Underbody Body and Accessories
2006 LSSV Service Manual Supplement
Installation Procedure
Important: The flat side of the D-ring must be facing out.
1. Install the D-ring on the bracket.
2. Slide the new wave washer (1) between the D-ring and
the bracket.
3. Install the D-ring nut and bolt (2). Tighten the nut and bolt
until the D-ring will stand straight out on its own.
Rear D-Ring Replacement (LSSV)
Removal Procedure
1. Remove the nut and bolt (1).
2. Remove the D-ring from the mount.
3. Discard the wave washer (2).
Installation Procedure
Important: The flat side of the D-ring must be facing out.
1. Install the D-ring on the bracket.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Slide the new wave washer (2) between the D-ring and
the bracket.
3. Install the D-ring nut and bolt (1). Tighten the nut and bolt
until the D-ring will stand straight out on its own.