Service manual

8-38 Frame and Underbody Body and Accessories
2006 LSSV Service Manual Supplement
Installation Procedure
1. Install the D-ring bracket to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the D-ring mounting bracket bolts (1).
Tighten
Tighten the bolts to 97 N•m (72 lb ft).
3. Install the D-ring. Refer to Rear D-Ring Replacement
(LSSV)
Upper Radiator Support Reinforcement
Removal Procedure
Caution: Refer to Vehicle Lifting Caution in Cautions and
Notices.
Important: Ensure that the vehicle is unloaded prior to
reinforcement replacement.
1. Raise and support the vehicle. Refer to Lifting and
Jacking the Vehicle in General Information in 2006 C/K
Truck Service Manual.
2. Remove body mount bolt (1).
3. Remove the upper reinforcement (2) from the radiator
core support (3).
Installation Procedure
1. Install the upper reinforcement (2) onto the radiator core
support (3).
2. Perform the following procedure before installing the
bolts.
• Remove all traces of the original adhesive patch.
• Clean the threads of the bolt with denatured alcohol
or equivalent and allow to dry.
• Apply Threadlocker GM P/N 12345493 (Canadian
P/N 10953488).
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the body mount bolt (1).
Tighten
Tighten body mount bolt to 70 N•m (52 lb ft).
4. Lower the vehicle. Refer to Lifting and Jacking the
Vehicle in General Information in 2006 C/K Truck Service
Manual.