Service manual

8-42 Frame and Underbody Body and Accessories
2006 LSSV Service Manual Supplement
Installation Procedure
1. Install the brackets (1, 2) and (6) on the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts (3, 4) and (5) and nuts (7).
Tighten
• Tighten bolts (3, 4) to 35 N•m (26 lb ft).
• Tighten bolts (5) to 50 N•m (37 lb ft).
3. Install the front support beams. Refer to Front Support
Beam Replacement.
4. Install the rear support beams. Refer to Rear Support
Beam Replacement.
5. Install the rear skid plate. Refer to Rear Skid Plate
Replacement.
6. Install the front skid plate. Refer to Front Skid Plate
Replacement.
Rear Support Beam Replacement
Removal Procedure
Caution: Refer to Vehicle Lifting Caution in Cautions and
Notices.
1. Raise the vehicle. Refer to Lifting and Jacking the
Vehicle in General Information in the 2006 C/K Truck
Service Manual.
2. Remove the rear skid plate. Refer to Rear Skid Plate
Replacement.
3. Remove the nuts (1) and bolts (2).
4. Remove the support beams (3).
Installation Procedure
1. Install the support beams (3).
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts (2) and nuts (1).
Tighten
Tighten front nuts and bolts to 35 N•m (26 lb ft).
3. Install the rear skid plate. Refer to Rear Skid Plate
Replacement.
4. Lower the vehicle. Refer to Lifting and Jacking the
Vehicle in General Information in the 2006 C/K Truck
Service Manual.