Service manual

8-44 Frame and Underbody Body and Accessories
2006 LSSV Service Manual Supplement
5. Remove the outer front cover bolts (1) from the support
(2).
6. Remove the cover bolts (1), remove support and lower
the cover (2). Remove from the vehicle.
Installation Procedure
1. Install the cover and support.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the cover bolts (1).
Tighten
Tighten bolt to 29 N•m (21 lb ft).
3. Install the front cover bolts (2).
Tighten
Tighten bolts to 50 N•m (37 lb ft).