Service manual

Body and Accessories Instrument Panel, Gages, and Console 8-59
2006 LSSV Service Manual Supplement
Repair Instructions
Voltmeter Gage Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Cautions
and Notices.
1. Disconnect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure in Engine Electrical.
2. Remove the accessory panel. Refer to Accessory
Instrument Panel (I/P) Replacement.
3. Remove the nuts (4) from the back of the voltmeter.
4. Remove the voltmeter connector (2).
5. Remove the voltmeter gage bracket (3) and remove the
voltmeter (1) from the panel.
Installation Procedure
1. Install the voltmeter (1) into the panel opening.
2. Install the bracket (3) on the back of the voltmeter.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the nuts (4) on the voltmeter gage studs.
Tighten
Tighten nuts to 2.8 N•m (24 lb in).
4. Connect the voltmeter connector (2).
5. Install the accessory panel. Refer to Accessory
Instrument Panel (I/P) Replacement.
6. Connect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure in Engine Electrical.
Accessory Instrument Panel (I/P)
Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Cautions
and Notices.
1. Disconnect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure in Engine Electrical.
2. Remove the fasteners (1) from the panel.
3. Move the panel (2) out far enough to gain access to the
harness connections.