Service manual

8-72 Interior Trim Body and Accessories
2006 LSSV Service Manual Supplement
Installation Procedure
1. Install the gun rack (1) and slide under the front seat
bolts.
2. Align the rear gun rack hole with stud in the floor.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the nut on the stud and tighten.
Tighten
• Tighten the rear nut to 20 N•m (15 lb ft).
• Tighten the front bolts to 55 N•m (41 lb ft).
Lower Cab Mount Gun Rack Replacement
Removal Procedure
1. Remove the 2 bolts (1) holding the support to the floor.
2. Remove the support (2).
Installation Procedure
1. Install the support (2) by aligning the bolt holes.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the 2 bolts (1) holding the support to the floor, and
tighten.
Tighten
Tighten the bolts to 3.5 N•m (30 lb in).