Service manual

8-74 Interior Trim Body and Accessories
2006 LSSV Service Manual Supplement
Installation Procedure
1. Install the left bracket (2) or the right bracket (3).
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the 4 bolts (1) to the bracket.
Tighten
Tighten the bolts to 8 N•m (70 lb in).
3. Install the lower rear window molding. Refer to Molding
Replacement – Rear Window Lower in Interior Trim in
the 2006 C/K Truck Service Manual.
4. Install the pioneer tool kit.
Enhanced Mobility Package Jack Mounting
Bracket Replacement (In Vehicle Tire
Carrier)
Removal Procedure
1. Remove the vehicle jack from the mount.
2. Remove the lower bracket nut (3).
3. Remove the upper bracket bolt (1) and washer.
4. Remove the mounting bracket (2).
Installation Procedure
1. Install the mount bracket (2) in the mounting position.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the washer and upper bracket bolt (1).
Tighten
Tighten the bolt to 53 N•m (39 lb ft).
3. Install the lower bracket nut (3).
Tighten
Tighten the nut to 53 N•m (39 lb ft).
4. Install the vehicle jack in the mount.