Service manual

8-76 Interior Trim Body and Accessories
2006 LSSV Service Manual Supplement
Installation Procedure
1. Install the mount bracket in the mounting position.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts (1) into the rivnut.
Tighten
Tighten the bolt to 9 N•m (80 lb in).
3. Install the nuts (2) onto the stud.
Tighten
Tighten the nut to 13 N•m (10 lb ft).
4. Install the vehicle jack in the bracket.
5. Lower the rear seat.
Enhanced Mobility Package Jack Mounting
Bracket Replacement (Crew Cab)
Removal Procedure
1. Raise up the rear passenger seat.
2. Remove the vehicle jack from the bracket.
3. Remove the rear bracket bolts (1).
4. Remove the mounting bracket.
Installation Procedure
1. Install the mount bracket in the mounting position.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the rear bracket bolts (1).
Tighten
Tighten the bolt to 9 N•m (80 lb in).
3. Install the vehicle jack in the bracket.
4. Lower the passenger rear seat.