Service manual

Body and Accessories Lighting Systems 8-111
2006 LSSV Service Manual Supplement
Commercial Trailer Connector
Replacement (LSSV)
Removal Procedure
1. Ensure that all lamp switches are in the OFF position.
2. Disconnect the harness connector from the trailer
connectors.
3. Release the lock tabs, turn the trailer connector (1) and
pull out from the bumper.
Installation Procedure
1. Install the trailer connector (1) into the opening in
bumper.
2. Turn the connector until lock tabs engage.
3. Connect the harness connector into the trailer lamp
connector.
Military Trailer Connector Replacement
(LSSV)
Removal Procedure
1. Ensure that all lamp switches are in the OFF position.
2. Disconnect the trailer harness connectors (1).
3. Remove the fasteners securing the connector to the
bumper.
4. Remove the cover (3) and trailer connector (2).