Service manual

Body and Accessories Lighting Systems 8-113
2006 LSSV Service Manual Supplement
Headlamp Bulb Replacement – Blackout
(B/O)
Removal Procedure
1. Remove the screws (1) holding the lens cap to the
assembly.
2. Remove the lens cap (2) and O-ring.
3. Remove the bulb from the lamp socket.
Installation Procedure
Important: Use a standard 1073 bulb for replacement.
1. Install the new bulb in the lamp socket.
Important: The O-ring installation must be a proper fit.
2. Install the O-ring with the lens cap (2).
3. Install the 3 screws (1) to the assembly.
Marker Lamp Replacement – Front
Blackout (B/O) (LSSV)
Removal Procedure
1. Ensure all lamp switches are in the OFF position.
2. Remove the wiring harness strap (4) from the marker
lamp harness.
3. Remove the harness connector (3) by releasing the
connector tab.
4. Remove the nuts (1) and the ground connector (2) from
the marker lamp.