Service manual

8-114 Lighting Systems Body and Accessories
2006 LSSV Service Manual Supplement
5. Remove the blackout (B/O) marker lamp assembly (1)
from the bumper.
Installation Procedure
1. Install the marker lamp (1) into the front bumper opening.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the nuts (1) and the ground connector (2) onto the
maker lamp studs.
Tighten
Tighten the marker lamp nuts to 2 N•m (18 lb in).
3. Install the harness connector (3) to the marker lamp
connector.
4. Secure the harness in the original mounting location
using the wiring harness strap (4).