Service manual

Body and Accessories Lighting Systems 8-117
2006 LSSV Service Manual Supplement
Voltmeter Gage Lamp Replacement
Removal Procedure
1. Ensure all lamp switches are in the OFF position.
2. Remove the accessory panel. Refer to Accessory
Instrument Panel (I/P) Replacement in Instrument Panel,
Gages and Console.
3. Remove the voltmeter gage lamp socket from the back of
the voltmeter gage.
4. Remove the bulb (1) from the voltmeter socket.
Installation Procedure
Important: Use a standard 194 bulb for replacement.
1. Install the bulb (1) into the voltmeter gage socket.
2. Install the lamp socket into the voltmeter gage.
3. Install the accessory panel. Refer to Accessory
Instrument Panel (I/P) Replacement in Instrument Panel,
Gages and Console.
Topper Dome Lamp Replacement
Removal Procedure
1. Remove the topper dome lamp bulb. Refer to Topper
Dome Lamp Bulb Replacement.
2. Remove the screws (1) from the lamp.
3. Disconnect the electrical wiring and remove the lamp
from the topper.