Service manual

Body and Accessories Seats 8-127
2006 LSSV Service Manual Supplement
Repair Instructions
Seat Replacement – Troop
Removal Procedure
1. Remove the 2 bolts, nuts and clamps holding the seat
assembly to the box rail.
Note the clamp and stud arrangement for installation
later.
2. Fold the seat section to the seatback and install the
tether pins to the locking holes for easy removal.
3. Remove the 2 bolts and Nylock nuts from the end of the
rail.
4. Remove the troop seat assembly.
Installation Procedure
Important: The left and right seat assemblies are not
interchangeable. Match the mounting hole pattern of the seat
assembly before attempting to install.
1. Unfold the third seat back (from the cab) down.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. When properly aligned, install the 2 bolts, screws and
nuts to the end of the rail.
Tighten
Tighten the bolts to 58 N•m (43 lb ft).
3. Install the 2 clamps, bolts and nuts holding the seat
assembly to the holes within the openings at the middle
and forward end of the box rail.
Tighten
Tighten the bolts to 58 N•m (43 lb ft).