Service manual

Body and Accessories Wiring Systems 8-165
2006 LSSV Service Manual Supplement
Repair Instructions
Auxiliary Lamp Harness Replacement –
Front
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Cautions
and Notices.
1. Disconnect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure in Engine Electrical.
2. Remove the radiator grille brush guard. Refer to Center
Radiator Grille Brush Guard Replacement and Outer
Radiator Grille Brush Guard Replacement or Radiator
Grille Brush Guard Replacement in Bumpers.
3. Remove the radiator grille. Refer to Grille Replacement
Chevrolet in Exterior Trim in 2006 C/K Truck Service
Manual.
4. Remove the filler panel. Refer to Radiator Air Baffle and
Deflector Replacement – Upper in Engine Cooling in
2006 C/K Truck Service Manual.
5. Trace the auxiliary harness connections to the original
harness.
6. Remove the connector from the right (6) and left (5)
blackout (B/O) marker lamp.
7. Remove the nut to the ground lead and all wiring harness
straps connecting the auxiliary harness.
8. Remove connector (4) and ground from blackout (B/O)
headlamp mounting stud.
9. Trace the auxiliary harness under the washer fluid
reservoir and remove the wiring harness straps along the
fender interior.
10. Trace the auxiliary harness under the battery tray area
and remove the wrap.
11. Remove the forward auxiliary harness (2) from the
vehicle.
12. Remove the wiring harness straps near the bulkhead and
disconnect the forward connector of the auxiliary harness
from the auxiliary I/P harness connector.