Service manual

Body and Accessories Wiring Systems 8-169
2006 LSSV Service Manual Supplement
Installation Procedure
1. Rivet the bracket (1) to the electrical center cover.
2. Set the electrical center block in its resting position until
the tabs (3) lock into place.
3. Install the electrical center cover assembly (1).
4. Install the top cover (2).
5. Install the fender upper brace.
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the upper brace fasteners.
Tighten
Tighten the fasteners to 25 N•m (18 lb ft).
7. Connect the battery cables. Refer to Battery Cable
Disconnect/Connect Procedure in Engine Electrical.