Service manual

Suspension Rear Suspension 3-13
2006 LSSV Service Manual Supplement
3. Remove shock cover nuts (3) and bolts (4).
4. Remove the lower shock nut (1) and bolt (2).
5. Remove the shock cover pieces from the axle.
Installation Procedure
1. Install the shock cover pieces on the axle. Ensure that
the tab on the upper cover is in the slot of the lower
cover.
2. Install the lower shock bolt (2) and nut (1).
3. Install bolts (4) and nuts (3) into the shock cover.
4. Install the top shock cover bolt (1).
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Ensure that the contact pad for the jounce shock is
aligned with the jounce shock.
Tighten
• Tighten lower shock bolt to 90 N•m (66 lb ft).
• Tighten shock cover bolts to 35 N•m (26 lb ft).
6. Lower the vehicle. Refer to Lifting and Jacking the
Vehicle in General Information in 2006 C/K Truck Service
Manual.