Service manual

3-14 Rear Suspension Suspension
2006 LSSV Service Manual Supplement
Shock Absorber Cover Replacement –
Right
Removal Procedure
Caution: Refer to Vehicle Lifting Caution in Cautions and
Notices.
1. Raise the vehicle. Refer to Lifting and Jacking the
Vehicle in General Information in 2006 C/K Truck Service
Manual.
2. Remove bolts (6) and nuts (4) from the cover.
3. Remove bolt (2) from the shock cover.
4. Remove nut (3) and bolt (8) from the shock.
5. Remove shock covers pieces (1, 5, 7) from the axle
housing.
Installation Procedure
1. Install the shock cover pieces (1, 5, 7). Ensure that the
tab in cover piece (1) fits into the slot in cover piece (5).
2. Install bolt (2) at the top of the cover.
3. Install shock bolt (8) and nut (3).
4. Install bolts (6) and nuts (4).
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Ensure that the contact pad for the jounce shock is
aligned with the jounce shock.
Tighten
• Tighten lower shock bolt to 90 N•m (66 lb ft).
• Tighten shock cover bolts to 35 N•m (26 lb ft).
6. Lower the vehicle. Refer to Lifting and Jacking the
Vehicle in General Information in 2006 C/K Truck Service
Manual.