Service manual

Suspension Tires and Wheels 3-19
2006 LSSV Service Manual Supplement
Repair Instructions
Tire Mounting and Dismounting (Beadlock)
Tools Required
D528235-H1 Run Flat Lubricant
Dismounting Procedure
Outer Half
1. Remove the air valve core to fully deflate the tire. Ensure
that valve air passage is not blocked.
2. Remove all balance weights from the wheel flange.
3. Place the tire on a flat surface with the nuts facing up.
4. Loosen all the nuts in a star pattern until all the nuts have
been removed.
5. Apply tire soap to the edge of the outer rim flange.
Important: Gently pry the outer flange away from the tire bead
in 3 locations around the rim.
6. Install a 7/16 in tire spoon (1) between the flange and the
tire and pull down until the spoon is horizontal with the
working surface.