Service manual

3-20 Tires and Wheels Suspension
2006 LSSV Service Manual Supplement
7. Install the pry bar between the flange and the tire then
push up. The blade of the pry bar will push the tire down
and off of the 5° beadseat.
8. Using the tire spoon (2) and pry bar (1) at intervals of
45°, work around the wheel and tire.
Important: Ensure that the wheel half is placed with the O-ring
side facing up to avoid scratching the surface.
9. Remove the outer wheel from the tire and remove the O-
ring and discard.
10. Flip the tire assembly over and apply tire soap to the
inner flange.
11. Using the pry bar and tire spoon, gently pry the inner
flange from the tire bead in 3 locations.
12. Using the tire spoon (1) between the flange and tire,
push the tire spoon down until it is horizontal to the
working surface to lift the wheel flange up.
13. Using the pry bar between the flange and tire push the
tire bead down. The pry bar will push the tire down and
off of the 5° bead seat.
14. Using the prybar (1) and tire spoon (2) work your way
around the tire at intervals of 45°.
Important: Ensure that the wheel half is placed with the O-ring
side facing up to avoid scratching the surface.
15. Remove the inner wheel half from the tire.