Service manual

Suspension Tires and Wheels 3-21
2006 LSSV Service Manual Supplement
16. Locate the air pressure sensor (1) and compress the
beadlock insert down enough to expose the sensor.
17. Remove the sensor from the beadlock insert.
18. Stand the tire on end allowing one side of the beadlock to
fall off-center into the tire chamber.
19. Place the tire back on the ground and compress the
beadlock in an oval shape and twist and pull out of the
tire cavity.
Cleaning and Inspection Procedure
1. Clean the following areas:
• Degrease the rim bead seats with denatured
alcohol and dry with a clean towel. Allow to dry.
• Clean the tire beads with a clean towel, to remove
any dirt or foreign materials.
• Clean the beadlock edges with a clean towel and
remove any foreign materials.
• Wipe the O-ring groove with a clean towel and
remove any foreign material from the groove.
• Clean the mating surfaces on the outer and inner
wheel halfs.