Service manual

3-22 Tires and Wheels Suspension
2006 LSSV Service Manual Supplement
2. Inspect the following areas:
• Outer wheel half for wear, damage or warpage.
• Inner wheel half for wear, damage or warpage.
• Beadlock for wear or damage.
Replace any worn or damaged parts.
Mounting Procedure
1. Place the tire on a horizontal surface. Compress the
beadlock from its round shape into an oval.
2. Holding the beadlock with both hands, rotate it and place
it into the tire cavity.
Important: The sensor must be opposite one of the two
beadlock grooves (2).
3. Install the tire pressure sensor assemble (1) within the
beadlock groove (2).
4. Position the beadlock, centering it between the tire
beads.
5. Lubricate the inner edge of the beadlock wheel and tire
beads with tire soap to aid installation of the wheel.