Service manual

Suspension Tires and Wheels 3-23
2006 LSSV Service Manual Supplement
6. Center the wheel air fitting with one of the grooves in the
beadlock and press inner wheel into tire.
7. Install the air valve into the rim pulling into position.
8. On the outer wheel apply a small amount of run flat
lubricant D528235-H1 to the O-ring groove and install the
O-ring. Remove excess of lubricant.
Important: Ensure that both inner wheel sealing surfaces are
completely free of any debris.
9. Install the outer wheel into the tire. Ensure that the air
fitting is in line with one of the grooves.
10. With the inner wheel studs facing up, install the wheel
nuts by hand to a minimum of 4 threads.