Service manual

3-28 Tires and Wheels Suspension
2006 LSSV Service Manual Supplement
3. Remove the lower pivot mount bolts (1).
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the lower pivot bracket onto the bumper and install
the bolts (1).
Tighten
Tighten the lower pivot mount bolts to 97 N•m (72 lb ft).
2. Install the upper mount onto the bumper and install the
pivot bolt through both mounts.
3. Install the upper mount pivot bolts (1).
Tighten
Tighten the upper pivot mount bolts to 97 N•m (72 lb ft).
4. Remove the pivot bolt and install the spare tire carrier.
Refer to Spare Tire Carrier Replacement (Swing Away).