Service manual

Suspension Tire Pressure Monitoring 3-47
2006 LSSV Service Manual Supplement
Level 1
Cold Inflation Pressure
Important: This function changes the cold inflation pressure for
each axle.
For tire pressure setting specifications refer to Tire Inflation
Pressure Specifications in Maintenance and Lubrication.
Factory default 2.41 Bar (35 psi).
1. Enter Level 1 Programming Mode. Refer to Entering
Programming Modes.
2. Press the TIRE button to scroll to the desired axle. The
tires of the selected axle are filled in.
3. Press the MODE button to view the current value.
4. Press the TIRE button to increase the value.
5. Press the MODE button to decrease the value.
6. Press the SET button to save when the desired value is
reached.
Important: Repeat programming steps 2-6 until Cold Inflation
Pressure levels are set for all axles as desired.
7. Press the SET button to exit.
8. Press the SET button again to revert to normal view.
Low Pressure Warning
Important: This function changes to low-pressure warning
threshold for each axle.
For tire pressure setting specifications refer to Tire Inflation
Pressure Specifications in Maintenance and Lubrication.
Factory default 1.24 Bar (18 psi).
1. Enter Level 1 Programming Mode. Refer to Entering
Programming Modes.
2. To enter this function press the MODE button until the
flat tire icon and pressure units are displayed.
3. Press the TIRE button to scroll to the desired axle. The
tires of the selected axle are filled in.