Service manual

3-48 Tire Pressure Monitoring Suspension
2006 LSSV Service Manual Supplement
4. Press the MODE button to view the current value.
5. Press the TIRE button to increase the value.
6. Press the MODE button to decrease the value.
7. Press the SET button to save when the desired value is
reached.
Important: Repeat programming steps 2-7 until Low-Pressure
warning levels are set for all axles as desired.
8. Press the SET button to exit.
9. Press the SET button again to revert to normal view.
Pressure Deviation Alert
Important: This function sets the pressure deviation alert
threshold for all tires.
Factory Default 34 Bar (5 psi).
1. Enter Level 1 Programming Mode. Refer to Entering
Programming Modes.
2. To enter this function press the MODE button until the ±
icon and pressure units are displayed.
3. Press the TIRE button to scroll to the desired axle. The
tires of the selected axle are filled in.
4. Press the MODE button to enter and display the current
value.
5. Press the TIRE button to increase the value.
6. Press the MODE button to decrease the value.
7. Press the MODE button until the display shows OFF to
disable this feature.
8. Press the SET button to save when the desired value is
reached.
9. Press the SET button again to revert to normal view.