Service manual

Suspension Tire Pressure Monitoring 3-49
2006 LSSV Service Manual Supplement
High Temperature Alert
Important: This function changes the high-temperature alert
threshold.
Factory Default 80°C (176°F).
1. Enter Level 1 Programming Mode. Refer to Entering
Programming Modes.
2. To enter, press the MODE button until the alert icon and
temperature until are displayed.
3. Press the TIRE button to enter and display the current
value of High Temperature Alert.
4. Press the TIRE button to increase the value.
5. Press the MODE button to decrease the value.
6. To disable this feature press the MODE button until the
display reads OFF.
7. Press the SET button to save and exit this mode when
the desired value is reached.
8. Press the SET button again to revert to normal mode.
Metric or Imperial Measurement Selection
Important: Use this mode to select the combination of pressure
and temperature units.
Unit Combinations are PSI - ° F, Bar - ° F, Bar - ° C, psi - ° C
Programming Steps
1. Enter Level 1 Programming Mode. Refer to Entering
Programming Modes.
2. To enter this function press the MODE button until the
pressure and temperature units are displayed (psi/Bar,
°C/°F).
3. Press the TIRE button to enter.
4. Use the TIRE or MODE button to scroll through the four
combinations of the unit settings.
5. When the desired combination is displayed press the
SET button to save and exit this mode.
6. Press the SET button again to revert to normal mode.