Manual

TM MODE
When the TV is set to the TV mode, the menu lets you customize the unit by allowing you
to change various settings as follows:
1. Press the MENU button on the main unit or the 1_ button @ on the remote to access
the on-screen menu.
2. Select one of the options at the top of the screen (AUDIO, VIDEO, SYSTEM, C.C. or
V-CHIP) using the Navigation <=@ or _ O button.
3. Use the Navigation _ el or 4>_ button to select one of the setup options, then press
the Navigation <= O or =>• button to adjust it as per the following steps.
YOU MUST BE IN TV MODE TO ACCESS THESE MENUS. TO ENTER TV MODE, SIMPLY
PRESS THE TV/AV/PC BUTrON UNTIL TV OR CATV APPEARS ON THE SCREEN.
AUDIO MENU
[]
TREBLE ............................ + 1
BASS ................ Hmmmmmm........ + 2
BALANCE I ................ Ill ............... I + 1
VIDEO MENU
[]
OQQ
_AU_ iO : VIDEO
T =...... ,._,...,-_ ...... ,. ,...,.-= 8
PICTURE I................ • ................ I e
COLOR I................ • ................ I 0
HUE I................ • ................ I 0
SHARP I................ • ................ I 0
If AUDIO option is selected, you can set the following:
TREBLE: Adjust for best treble (high) response.
BASS: Adjust for best bass (low) response.
BALANCE: Adjust for best balance between the left and
right speakers. Usually setting this option in the middle is
optimal.
SYSTEM MENU
[]
SYSTEM
MTS STEREO SAP MONO
MUTE No Yes
LANGUAGE ENGLISH
SLEEP OFF 30 60 90
TV/CATV TV CATV
OH. SEARCH No Y÷s
OH. MEMORY INo Yes
RECALL No Yes
If VIDEO option is selected, you can set the following:
BRIGHT: Adjusts the brightness of the image.
PICTURE: Adjusts the contrast of the image.
COLOR: Adjusts the color intensity.
HUE: .Adjusts the red-green color balance of the unit.
SHARP: Adjusts the sharpness of the image.
If SYSTEM option is selected, you can set the following:
MTS: Adjust the MTS setting to select the desired audio
option (STEREO, SAP or MONO). You can also select the
desired audio option using the remote, see page 25.
MUTE: Select YES to mute the sound or NO for normal
sound. You can also mute the TV using the remote, see
page 25.
LANGUAGE: Select a language, which is used for the on-
screen display (ENGLISH, JAPANESE or CHINESE).
SLEEP: Select a desired sleep time of 30, 60 or 90
minutes. The TV wilt then turn off after the selected amount
of time.
TV/CATV: Select CATV if using cable television or TV if
using an outdoor antenna.
OH. SEARCH: Select YES to start auto channel scan (see
page 22).
OH. MEMORY: Select YES to add a channel into memory
or NO to remove a channel from memory (see page 23).
RECALL: Select YES to recall the original video setting.
17