COLOR CON DVD/DISCOS user guide MVD2113

28
Playback procedure
1
Press TV/DVD to select
the DVD mode.
Press OPEN/CLOSE on
the unit or the remote
control.
The disc tray will open.
2
Place a disc onto the
tray. Position it with the
printed label side up,
align it with the guides,
and place it in its proper
position.
NOTES:
• If a non-compatible disc is loaded,
“Incorrect Disc”, “Region Code Error” or
“Parental Error” will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 25 and 38).
• Some discs may take a minute or so to
start playback.
• A “Prohibition” symbol
may appear at
the upper left of the screen.
This symbol means either the feature you
tried is not available on the disc, or the
unit can not access the feature at this
time. This does not indicate a problem
with the unit.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the
unit, “Reading” will appear on the display
and then “Incorrect Disc” will be dis played.
• Some playback operations of DVDs may
be intentionally fixed by software
producers. Since this unit plays DVDs
according to the disc contents the
software producers designed, some
playback features may not be
available. Also refer to the instructions
supplied with the DVDs.
4
Press PLAY or OPEN/
CLOSE.
The disc tray closes
automatically.
On the screen,
changes
to “Reading” and then
playback will commence.
• A menu screen may
appear on the TV screen,
if the disc has a menu
feature. In this case,
press
, , , or
ENTER to operate a
menu feature.
3
Press STOP to end playback.
• The unit memorizes the stopped point, depending on
the disc. “
” appears on the screen for approx. 4 seconds.
Press PLAY to resume playback (from the scene point).
• If you press STOP again (“
” appears on the screen)
or unload the disc, the unit will clear the stopped point.
5
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and unit turns off.
Reading
5P20521A [E] P27-32 5/12/04, 2:42 PM28