COLOR CON DVD/DISCOS user guide MVD2113

49
ENGLISH
Playback does not start when the
title is selected.
• Check the RATING LEVEL setup.
Audio soundtrack and/or subtitle
language is not changed when
you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
No picture. • TV/DVD selector is not set correctly.
No sound.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
• Select the correct Audio Output position on AV amplifier.
Picture is distorted during CUE or
REVIEW.
• The picture will be distorted occasionally.
Stopping playback, search, slow-
motion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions.
No 4:3 picture. • The setup does not match your TV.
No on-screen display. • Select Display On.
No surround sound. • The setup does not match your stereo system.
The remote control does not
function.
• Aim at the remote control at the remote sensor.
• Operate within Approx. 5 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
The unit or remote operation key
is not functioning.
• Turn off the unit and unplug the AC power cord for several min-
utes, then replug it.
28
25
–
26
–
29
45
36
36
45
10
–
–
Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.
• The function is prohibited with the unit or the disc.
“
” appears on the screen.
–
38~40
41
34
35
28
SYMPTOMS POSSIBLE SOLUTIONS
DVD
PAGE
REMOTE CONTROL
DEGAUSSING SYSTEM
This television has a degaussing circuit that will clear up color distortions on the TV screen that
are caused by any excess magnetism which happens to get too close to the TV. This circuit is
designed to operate once when the set is first plugged in. If minor color distortions are seen in
some locations on the screen, please unplug the TV for approximately 15 minutes. When the TV
is plugged back in, the degaussing circuit will operate once to clear up any color distortions.
Repeat this procedure any time the TV screen is accidentally magnetized, or when the TV is
moved or relocated.
5P20521A [E] P47-Back 5/12/04, 2:43 PM49