Manual

÷
÷
TV operation
NOTES:
* If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
* If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes
1
2
To turn on the TV/DVD, press
POWER.
Adjust the volume level by
pressing VOL ÷ or -. The
volume level wilt be indicated on
the screen by green bars. As the
volume level increase% so do
the number of bars. If the volume
decreases, the number of green
bars also decreases.
3
4
Set the TV/CABLE menu
option to the appropriate TV - VHF/UHF channels
CABLE - CABLE channels
position. (See page 17.)
Press the Direct Channel selection
buttons to select the channel.
TV Mode Direct Channel Selection
When the TV/CABLE menu option
is in the TV position, all channels
can be instantly selected by using
two buttons (for example, to select
channel 2, press "0% then "2'L If
you press only "2", channel
selection wB be delayed for a few
seconds.) For channels 10 and
above, press the 2 digits in order
CABLE Mode Direct Channel Selection
When the TV/CABLE menu option is in the CABLE posWon, channels
can be selected as follows:
TO SELECT Cable TV CHANNELS:
1-9: Press "0" twice, then 1-9 as needed. Example, to select
channel 2, press "002".
10-12: Press "0", then the remaining 2 digits. Example, to
select channel 12, press "012 ".
13-99: Press the 2 digits in order Example, to select channel
36, press "36_'.
100-125: Press the 3 digits in order. Example, to select channel
120, press "120"
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds
TV CABLE
VHF BHF
2-13 2-13
UHF STD/HRC/IRC
14-69 14-36
(A)(W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-84
(86) (84)
95-89
(A-5)(A-l)
100-125
(100)(125)
91
(5A)
÷
5P20521A [El P12-17
÷
5/12/04. 2:41 PM