PORTABLE DVD/VCD/MP3/PHOTO CD Player User's Guide

39
OTHERS
Troubleshooting
Please check the following chart for solutions to your problem before contacting
any service and support personnel.
Temporary
function failure
Mal-fabricated disc used.
Wrong buttons pressed.
Foreign static electricity leaks
inside the enclosure.
Wait for 5 to 10 seconds and this
player will restore normal functions.
Press other buttons.
Restart this player after powering
this player off for 1 to 2 minutes.
Too much in
terference strip
es on image
The rechargeable battery becomes
low
Recharge the battery.
Use the power adapter.
Cause
Correction
Symptom
No sound
No picture
No color
No disc reading
Signal not properly connected.
Disc warped or dirty.
Player in mute status.
Signal not properly connected.
TV not set for proper system.
TV system not right.
TV set color not properly adjusted.
No disc in the player.
Disc not properly loaded.
Condensation on the laser head.
Connect signal securely.
Clean your disc.
Press MUTE button again.
Connect signal securely.
Reset the AV/TV status of your
TV set.
Press P/N button on the remote
control to set the system.
Readjust color of your TV set.
Load a disc.
Reload a disc, with the label side
facing up.
Turn on the player, unload the
disc and leave it on for about one hour.
Remote control
failure
Remote control not pointing to the
sensor window.
Remote control's operating distance
more than 8 meters away from the sensor
window of the player
Batteries low.
Use the remote control properly.
Replace the battery.
Picture rolling
TV set system not properly adjusted. Readjust system of your TV set.