Manual

PROGRESSIVE (Y, PB, PR) VIDEO OUT:
Use these jacks to connect to a TV with
progressive video input jacks, press the
IP (Interlace/Progressive) button to select
PROGRESSIVE SCAN. (NOTE: If you
press the IP button again, the TV mode
setting will change back to INTERLACE.
Also, the Component Output will change
back to LCD mode and you will be able
to observe the pictures on the unit's
display screen again.) Progressive scan
is a video scanning system that displays
all lines in a frame in one pass, as opposed to the traditional system, interlaced
scan. This connection provides optimum quality. To ensure maximum picture quality,
use three video-grade cables for connections. Note that it is essential to match the
color-coded connectors with a compatible TV.
525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO
OUTPUT
Compared tostandardinterlacedvideo,progressivescan effectivelydoublesthe
amount ofvideoinformationfed toyourTV or monitor.The resultisa stable,flicker-
freeimage.(Check yourTV/monitorforcompatibilitywiththisfeature.)
For theveryhighestpicturequality,trywatchinga movie on DVD-Video on a
progressive-scancompatibleTV.
NOTES:
If you connect a TV that is not compatible with a progressive scan signal, press
the IP button to select Interlace, and set the Component Output to YUV in the
VIDEO SETUP menu. See page 23 to set the Component Output to YUV.
CONSUMERS SHOULD NOTE THAT NOTALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER NOT USE PROGRESSIVE SCAN.
14