Manual

CONNECTING THE DVD TO A HOME THEATRE SYSTEM (COAXIAL JACK)

Place the subwoofer, front, rear and center

speakers in Eocations as shown/described

here. After correctly positioning the

speakers, perform the Tone Test on the AV

Amplifier and adjust the Volume controL(s)

untir the desired sound is achieved. For best

results, sit in the viewing position and have

someone adjust the volumes for you; this will

enable you to set the optimar levels.

i, Front Left Speaker

2, Television

3, Center Speaker-can be located on top or

below the Television,

4, Sub-woofer-can be located anywhere ir_the

room.

5, Front Right Speaker

6, ViewinglListening Position-The best

listening position is obtained by positioning the

chair, sofa, etc, in the middle of all the

speakers,

7_ Rear Left Speaker

8, Rear Right Speaker

9, AV Amplifier w/Dolby Digital Decoder

NOTES FOR CONNECTING TO A TV:

Set the TV's TV/VIDEO button or switch to the VIDEO setting.

When connecting the unit, refer to the owner's manuals for the TV and the audio

system, as wel! as this manual

When connecting, make sure the power is off and all units are unplugged before making

any connections.

Connect the unit to your TV directly. If you connect the unit through a VCR, the playback

picture will be distorted because DVD video discs are copy protected.

Set the SPDIF option to PCM, see page 20.